Vimar 30810.B Handleiding (148 Pagina's)

Handleiding

69

View Wireless

Devices mesh network

Wait for the test to be completed

(maximum 4s per device)

Devices mesh network

Here is the real connection status of the

devices mesh network to the gateway.

Any errors are in red. Find out how to solve.

Water heater

Kitchen light Window

Door opener Wall light

Left window Right window

KITCHEN

ENTRANCE

LIVING ROOM

BATHROOM

Try again



At the end of the test all the devices (wireless nodes) and respective environments will be displayed; those reached correctly will be displayed in green whereas those with

which the gateway was unable to establish a connection will be displayed in red. Select "Try again" to repeat the test.

Select to go back to the test screen.

• Select "Battery-free controls" to activate the test to check that the connection between the radio controls art. 03925 and the gateway are working properly.

To activate the test, press any button of all the controls art. 03925 and select .

Battery-free controls

Check the connectivity of battery-free

controls by pressing any button,

then proceed,

Battery-free controls

Here is the status of the battery-free controls present.

Those with a low signal are in orange, those that

cannot be reached are in red. What does it mean?

Hallway key Hallway key

Lateral key

LEFT WINDOW

KITCHEN LIGHT KITCHEN LIGHT RIGHT WINDOW

Try again



At the end of the test, all the controls art. 03925 and the respective environments will be displayed; those with a good signal will be displayed in green, those with poor

quality signal in orange and those not reached or with insufﬁcient signal in red. Select "Try again" to repeat the test.

Select to go back to the test screen.

Configuration

Bekijk gratis de handleiding van Vimar 30810.B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.