Vimar 03989 handleiding
Handleiding
Je bekijkt pagina 1 van 6
Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
03989 01 2505
03989 - IoT connected thermostatic head
VIEW WIRELESS SMART HOME
The thermostatic head, fitted directly on the radiator, regulates the room temperature by con-
trolling the flow of hot water circulating in the radiators of a heating system. Thanks to Bluetooth
technology connectivity, it integrates into the View Wireless system and can be controlled manual-
ly locally, by an IoT thermostat (if configured in association), or remotely via the View App or voice
assistants. The IoT connected heads replace existing thermostatic heads and are compatible
with most valves through the use of various adapters (see the VALVE COMPATIBILITY TABLE).
Download the View Wireless App from the stores onto the tablet/smartphone you
will be using for configuration.
When the device is powered for the rst conguration, we recommend you search for any
new rmware and perform the update.
You will also need:
Gateway art. 30807.x-20597-19597-14597
View App
for management via smartphone/tablet
Amazon Alexa, Google Assistant, Siri (Homekit) voice assistants for possible voice
operation
GENERAL SYSTEM CONFIGURATION
1. Create your Installer account on MyVIMAR (on-line).
2. Wire all the devices in the system (2-way switches, relays, thermostats, gateway, etc.).
3. Start the View Wireless App and log in with the credentials you just created.
4. Create the system and the environments.
5. Associate all the devices with the environments, except for the gateway (which should be
associated last).
6.
For every device, set the function, the parameters and any accessory devices (wired or radio
control and related function).
7. Transfer the configuration of the devices to the gateway and connect it to the Wi-Fi network.
8. Transfer the system to the Administrator user (who must have created his/her profile on
MyVIMAR).
For details, see the View Wireless App manual that can be downloaded from the www.
vimar.com website.
FIRST HEAD START-UP AND CONFIGURATION IN
1. Screw the thermostatic head onto the radiator and insert the batteries as illustrated in
"INSTALLATION AND BATTERY INSERTION."
After inserting the batteries, the display will show an animation in the central area:
2. Press the button to start calibration or wait 5 min.
During calibration, the display remains off.
At the end of calibration (which takes approximately 30 seconds), the display will show the
room temperature for 2 seconds and then turn off, entering standby mode.
2 s
°C
3. Start the View Wireless App and view the additional devices screen.
A
Display
: Touch keys for setting and operation
: Bluetooth configuration.
- ON: head working correctly
- OFF; head not configured
- Slow flashing: head configured but not connected to the network
- Rapid flashing: head configuration in progress
: Head in ON mode active
: Flat battery signal
°C = degrees Celsius
B Temperature sensor
C
Push button to access the battery compartment
D
Hooking ring
A
°C
C
D
B
4. Select “Add” ( ), choose the environment to place the head and give it a name.
5. Select ; activate the Bluetooth connection on your tablet/smartphone and approach the
head with it.
6. Press the
button briefly to exit standby.
°C
7. Press the button again for 3 s; the display flashes twice and shows the set point after 3 s.
Press buttons and on the head simultaneously for 6 s.
°C
°C °C
3 s
°C
Bekijk gratis de handleiding van Vimar 03989, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | 03989 |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 1119 MB |
