TFA COOL@HOME 30.3046.01 handleiding
Handleiding
Je bekijkt pagina 14 van 46
– 26 – – 27 –
Wireless thermometer
• Avoid being close to possible sources of interference
that may affect radio reception (see “Location and
mounting”).
• During night-time, the atmospheric interference is
usually less severe. A single daily reception is ade-
quate to keep the accuracy deviation under 1 second.
7. Operation
7.1 Manual settings
• Press and hold the SET button for three seconds to
enter the setting mode.
• The first adjustable value flashes on the display.
• Use the MAX/+ or –/MIN button to make the desired
setting.
• Confirm with the SET button and go to the next set-
ting.
• The sequence is shown as follows:
– Ventilation alarm volume (On Lo / On Hi / OFF)
(default: On Lo)
– DCF reception On/OFF (default: dCF On)
– Time zone -12/+12 (default: TZ 00)
– Hour, minutes
– Year, month, date
• Press and hold the MAX/+ or –/MIN button in the
respective setting mode for quick setting. The device
will automatically quit the setting mode if no button
is pressed for 20 seconds.
7.1.1 Volume setting for the ventilation alarm
• In the setting mode, you can set the volume of the
ventilation alarm in 2 levels (Lo / Hi) or switch it off
(OFF) (see “Ventilation recommendation and
alarm”).
7.1.2 DCF reception
• By default, the DCF reception is activated (dCF On)
and after successful reception of the DCF signal no
manual time setting is necessary.
Wireless thermometer
• Once the DCF time reception is deactivated (dCF
OFF), the clock and date must be manually set. No
time zone will appear.
• If the DCF reception is activated, the manually set
time will be overwritten by the DCF time when the
signal is received successfully.
7.1.3 Time zone setting
• In the setting mode you can make the time zone cor-
rection
• The time zone correction is needed for countries
where the DCF signal can be received but the time
zone is different from the DCF time (e.g. +1=one
hour plus).
8. Ventilation recommendation and alarm
• The device checks the room temperature and the
outside temperature simultaneously, and recom-
mends to open/close windows to lower the room
temperature.
– Outdoor temperature is lower than indoor tem-
perature: Window OPEN symbol
– Outdoor temperature is higher than indoor tem-
perature: Window CLOSED symbol
• In addition, an alarm is triggered as soon as the dis-
play (window OPEN/CLOSED) changes and the cur-
rent indoor and outdoor temperatures overlap. The
display flashes and an alarm tone sounds if desired.
This alarm function is configured in the setting mode
(see “Volume setting for the ventilation alarm”).
8.1 Activate and deactivate the ventilation alarm
• To ensure that the symbol (window OPEN/CLOSED)
appears on the display and an alarm is triggered as
soon as the display changes, the alarm must be active.
• Press and hold the ALARM button for 3 seconds to
activate the alarm function (default OFF).
• The alarm symbol appears on the display and “On” is
flashing, if the alarm is activated. Wait some seconds
until the display returns to normal mode to confirm
the setting. The alarm symbol remains on the display.
TFA_No. 30.3046_Anleitung 15.06.2023 14:33 Uhr Seite 14
Bekijk gratis de handleiding van TFA COOL@HOME 30.3046.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TFA |
| Model | COOL@HOME 30.3046.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2712 MB |
