TFA COOL@HOME 30.3046.01 handleiding
Handleiding
Je bekijkt pagina 15 van 46
– 28 – – 29 –
Wireless thermometer
• There are three different alarm symbols depending
on the alarm volume setting:
– Symbol with one sound wave: Alarm volume low
(in setting mode On Lo).
– Symbol with two sound waves: Alarm volume
high (in setting mode On Hi).
– Symbol without sound wave: no alarm sound (in
setting mode OFF).
•
If you do not wish to be notified about the ventilation
recommendations (e.g. outside the warm season), you
can deactivate this function completely. Press and
hold the ALARM button for 3 seconds. “OFF” is flash-
ing. Wait some seconds until the display returns to
normal mode to confirm the setting. The alarm symbol
and the ventilation recommendation disappear.
8.2 Alarm event
• After the ventilation alarm has been activated, an
alarm is triggered when the current indoor and out-
door temperatures overlap for the first time. This is to
draw attention to the change in ventilation needs.
• The window display changes (OPEN CLOSE or
CLOSE OPEN), the alarm symbol flashes and an
alarm signal sounds three times in quick succession
(provided that in setting mode the volume is activa-
ted). After that, the alarm signal sounds again every
minute
• Follow the ventilation recommendation and open or
close the windows. Press briefly the ALARM button to
turn off the current alarm. The alarm function remains
active and is triggered next time the ventilation re-
commendation changes.
9. Maximum/Minimum function
• Press the –/MIN button in normal mode to show the
minimum (MIN) values of indoor and outdoor tem-
perature since the last reset with time and date of
recording. Press the –/MIN button again to return to
normal mode.
• Repeat the process by pressing the MAX/+ button to
see the maximum values.
Wireless thermometer
• The device will automatically quit the MAX/MIN
mode if no button is pressed for 20 seconds.
• Press and hold the SET button for 3 seconds while
the highest or lowest values are displayed. The val-
ues will be deleted individually and reset to the cur-
rent state.
10. Trend arrows
Temperature increases by 0.2°C or more
in the last 5 minutes
Temperature increases by 1°C or more
in the last 15 minutes
Temperature decreases by 0.2°C or more
in the last 5 minutes
Temperature decreases by 1°C or more
in the last 15 minutes
No arrow
Change within the last 5 minutes less
than 0.2°C
11. Location and mounting
• When placed outdoors, choose a shady and dry
place for the transmitter. Direct sunlight may trigger
incorrect measurement and continuous humidity
damages the electronic components needlessly.
• Place the base station in any room of the house.
• Avoid being close to possible sources of interference
that may affect radio reception. It is recommended to
keep a distance of at least 2 metres to possibly inter-
fering sources (TV, computer, microwave, wireless
phones, baby monitors) and large metal objects (e.g.
refrigerator). Within solid walls, especially ones with
metal parts, the transmission range can be reduced
considerably. In extreme cases, please place the unit
close to a window to improve reception.
TFA_No. 30.3046_Anleitung 15.06.2023 14:33 Uhr Seite 15
Bekijk gratis de handleiding van TFA COOL@HOME 30.3046.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TFA |
| Model | COOL@HOME 30.3046.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2712 MB |
