Tenda W12 handleiding
Handleiding
Je bekijkt pagina 30 van 109
23
5.2 DHCP Server
5.2.1 Overview
The AP provides a DHCP server function to assign IP addresses to clients on the LAN. By default, the
DHCP server function is disabled.
If the new and original IP addresses of the LAN port belong to different network segments, the system
changes the IP address pool of the DHCP server function of the AP so that the IP address pool and the
new IP address of the LAN port belong to the same network segment.
5.2.2 Configure the DHCP Server
To access the page, choose Network Settings > DHCP Server.
This page enables you to set parameters related to the DHCP server.
If there are other DHCP servers in the network, ensure that the DHCP address pool of the AP does not
overlap with those of other DHCP servers so as to avoid address conflicts.
Parameter description
Parameter
Description
DHCP Server
It specifies whether to enable the DHCP server function of the AP. By default, it is
disabled.
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
