Tenda W12 handleiding
Handleiding
Je bekijkt pagina 29 van 109
22
Parameter
Description
Ethernet Mode
It specifies the Ethernet mode of the PoE power-supply port (the rear port of W36AP)
of this AP.
Auto Negotiation: This mode features a high transmission rate but short
transmission distance. Generally, this mode is recommended.
10 Mbps Half Duplex: This mode features a long transmission distance but
relatively low transmission rate (usually 10 Mbps).
The 10 Mbps Half Duplex mode is recommended only if the Ethernet cable that
connects the PoE power-supply port of the AP to a peer device exceeds 100
meters. In this case, the connected LAN port of the peer device must work in
auto-negotiation mode. Otherwise, the PoE power-supply port of the AP may not
be able to properly transmit or receive data.
Modifications to Ethernet Mode take effect after you reset the AP or unplug
from and plug into the port again.
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
