Schneider BC650-RSX761 handleiding
Handleiding
Je bekijkt pagina 5 van 12
Back-UPS BC650-RSX761
5
Transfer Voltage and Sensitivity Settings
Voltage regulation
The Back-UPS will switch to battery power if the AC input voltage level
becomes too low or too high, or if the AC power is experiencing voltage
fluctuations.
No-load shutdown
The UPS will shut down to conserve energy if while operating on battery
power the UPS detects that connected equipment is using less than 15 W of
energy for more than 15 minutes.
Disable this feature if low power consuming equipment like ADSL-modem or
wi-fi router is connected to the Back-UPS.
No-load shutdown can be enabled or disabled through Program mode
described below.
Voltage sensitivity adjustment
If the Back-UPS switches to battery power too frequently or too infrequently,
adjust the transfer voltage and sensitivity settings:
1.
Verify that the Back-UPS battery is connected. Connect the Back-UPS to a wall
outlet. The Back-UPS should be turned off.
2. Press and hold the POWER ON/OFF button until the LED continuously flashes
green. Release the button. The Back-UPS is now in Program mode.
3. The LED will flash once, twice, or three times per second, and emit audible
beeps to indicate the current sensitivity level. The Back-UPS will beep to
indicate that No-load Shutdown is enabled. Refer to the table for an explanation
of the transfer voltage sensitivity levels.
4. Press the POWER ON/OFF button within two seconds to change the setting.
Continue pressing the button until the desired setting is reached. If the button is
not pressed within five seconds, the Back-UPS will exit the Program Mode.
5. To select LOW sensitivity, press the POWER ON/OFF button until the LED
flashes green once per second.
6. To select MEDIUM sensitivity, press the POWER ON/OFF button until the LED
flashes green two times per second.
7. To select HIGH sensitivity, press the POWER ON/OFF button until the LED
flashes green three times per second.
8. To exit Program mode wait for five seconds, the LED will extinguish. Program
mode is no longer active.
Bekijk gratis de handleiding van Schneider BC650-RSX761, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Schneider |
| Model | BC650-RSX761 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1156 MB |
