Schneider Altivar 61 VW3A3502 handleiding
Handleiding
Je bekijkt pagina 9 van 35
1765272 10/2011 9
Hardware setup
Characteristics
Electrical characteristics
Power supply Voltage V 24 c (min. 19, max. 30)
Current
consumption
Maximum A 2
No-load mA 80
Using logic output mA 200 maximum (1)
Logic inputs LI51…LI60 Impedance 4.4 kΩ
Maximum voltage: 30 V c
Switching thresholds:
State 0 if y 5 V or logic input not wired
State 1 if u 11 V
Common point for all the card I/O (2)
Logic outputs LO51…LO56 Six 24 V c logic outputs, positive logic open collector type (source),
compatible with level 1 PLC, standard IEC 65A-68
Maximum switching voltage: 30 V
Maximum current: 200 mA
Common point for all the card I/O (2)
I/O connection Type of contact Screw, at intervals of 3.81 mm
2
Maximum capacity mm
2
1.5 (AWG 16)
Tightening torque
Nm
0.25
Lithium battery Life 8 years
(1) If the power consumption table does not exceed 200 mA, this card can be powered by the drive. Otherwise, an external 24 V c power supply must be used.
(2) This common point is also the drive 0 V (COM).
Bekijk gratis de handleiding van Schneider Altivar 61 VW3A3502, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Schneider |
| Model | Altivar 61 VW3A3502 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2928 MB |
