Schneider Altivar 61 VW3A3319 handleiding

Niet gecategoriseerd

Schneider

38 pagina's

PDF beschikbaar

Handleiding

16 1765274 08/2012

9. Configuration

9. 2. Control

Numerous configurations are possible. For more information, refer to the Programming Manual and the Parameters Manual.

The following configurations are just some of the possibilities available.

b Allowed configurations

If the drive is only monitored by BACnet:

There is no configuration constraint.

If the drive is controlled by BACnet:

The parameter [Profile] (CHCF) must be configured to [Not separ.] (SIM) or [Separate] (SEP). [Not separ.] (SIM) is the default value.

It is not allowed to configure the parameter [Profile] (CHCF) to the value [8 serie] (SE8) or [I/O profile] (IO).

If a forbidden configuration is done, the drive will trip on [External fault com.] (EPF2).

b Control via BACnet

The command and the setpoint come from BACnet.

Configure the following parameters:

Configuration via the graphic display terminal or the integrated display terminal:

Parameter Value Comment

Profile Non separate CiA402 profile The run command are in CiA402 profile the command

and the setpoint come from the same channel.

Setpoint 1 and command configuration Network card The setpoint and command come from BACnet.

Menu Parameter Value

[1.6 - COMMAND] (CtL-) [Profile] (CHCF) [Not separ.] (SIM):default value

[Ref.1 chan] (Fr1) [Com. card] (nEt)

Bekijk gratis de handleiding van Schneider Altivar 61 VW3A3319, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.