RTS EKP-3016 handleiding
Handleiding
Je bekijkt pagina 31 van 326
KP Series Installation 31
Changing the Front Headset Connector
The front headset connector can be switched between a 5-/6-pin XLR connect and a 4-pin XLR connector.
To replace the front panel headset connector, do the following:
NOTE: The instructions are the same for both the KP-5032/5032PB and KP-4016/4016PB keypanels.
1. Using a flat-blade screwdriver with 2.4mm wide (3/32 in.) tip, turn the set screw counterclockwise to loosen the
connector from the unit.
2. Once the connector is loose, tip the unit and gently shake the connector loose.
3. Carefully pull the headset cables free from the chassis.
NOTE: If the cable assembly becomes caught, shift the cable up and down to clear the cable from the unit.
Bekijk gratis de handleiding van RTS EKP-3016, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RTS |
| Model | EKP-3016 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 53755 MB |
