Roland TR-1000 handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 36
9
Top panel/front panel
1
2
3
4
5
6
7
8
9
Panel descriptions and operations
1
Common section 1/pattern section
Controller Explanation
[VOLUME] knob
Adjusts the volume of audio coming from
the MIX OUT jack.
* This does not change the volume of
signal from the INDIVIDUAL OUT and
ANALOG FX OUT jacks.
[EXT IN] knob
Adjusts the input level for the EXTERNAL
IN jacks.
[SONG] button
Creates a song by connecting multiple
patterns (p. 29).
[SAMPLE] button
Creates a sample from the audio played
into the EXTERNAL IN jacks and from the
patterns (p. 25).
[PTN SELECT] button Selects a pattern (p. 15).
[TR-REC] button
Records a pattern using step recording (p.
17).
[INST PLAY] button
Use the keys [1]–[10] to play in real time
(p. 19).
Press keys [13]–[16] while holding down
the [INST PLAY] button to select a play
mode.
[INST REC] button
Records a pattern with real-time recording
(p. 19).
[LAST] button Sets the length of the pattern.
[SUB] button
Sets the sub steps (duplets, triplets,
quadruplets, etc.).
[STEP LOOP] button Loops a specic step (or range of steps).
MOTION [ON] button
If this is ON, knob operation data (MOTION)
is played back (p. 20).
MOTION [REC] button
If this is ON, knob operation data (MOTION)
is recorded (p. 20).
[VARI CHAIN] button
The variation lights up while played back in
a chain (p. 15). Press the button while it
is lit to cancel the chain.
Variation [A]–[H] buttons
These switch between the pattern
variations (A-H).
[SHIFT] button
If you press another button while holding
down this button, the related settings
screen is shown.
[CLEAR] button
Erases the recorded content of a track, or
erases a pattern (p. 27).
[MUTE] button
Mutes (silences) the selected track (p.
28).
2
Eect controlling section
Controller Explanation
ACCENT
[STEP] button
Records an accent during step
recording.
You can also use this to edit the
motion of an eect.
[LEVEL] knob Adjusts the accent volume.
REVERB
[LEVEL] knob Adjusts the reverb volume.
[TIME] knob Adjusts the reverb time.
DELAY
[LEVEL] knob Adjusts the delay volume.
[TIME] knob Adjusts the delay time.
[FEEDBACK] knob
Adjusts the volume of delay that is
returned to the input.
MASTER FX
[ON] button Turns the master eect on/o.
[CTRL 1-3] knobs Controls the master eect.
ANALOG FX
[ON] button Turns the analog eect on/o.
[FILTER] knob
Adjusts the lter’s cuto
frequency.
[DRIVE] knob Adjusts the distortion.

Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkRoland
ModelTR-1000
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5438 MB