Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 31 van 36
31
Changing a project
1. Press the [MENU] button so it’s lit.
The MENU screen appears.
2. Use the [C6/VALUE] knob to select “PROJECT”, and
press the [ENTER] button.
3. Use the [C3/SCROLL] knob to select “PROJECT
CHANGE”, and press the [ENTER] button.
4. Use the [C6/VALUE] knob to select the project
number, and press the [ENTER] button.
A conrmation message appears.
5. Press the [ENTER] button.
When you edit a project, any edits or settings that you haven’t
saved are discarded. Before editing the project, perform the write
operation (p. 27).
Conguring a project
1. Press the [MENU] button so it’s lit.
The MENU screen appears.
2. Use the [C6/VALUE] knob to select “PROJECT”, and
press the [ENTER] button.
3. Use the [C3/SCROLL] knob to select a parameter.
4. Use the [C6/VALUE] knob to set the value.
GENERAL
Parameter Value Explanation
Tempo
Source
Pattern,
Project
Pattern: The unit uses the tempo that’s
set for each pattern.
Project: The unit always uses the
tempo that’s set for the project.
Tempo 40.00–300.00 Sets the project tempo.
Tempo
Sync
Auto, MIDI,
USB, INT
Species the tempo source.
Auto: The tempo automatically
synchronizes to the MIDI clock if MIDI
clocks are being input via the MIDI IN
connector or the USB port.
When MIDI clocks are input
simultaneously from the MIDI IN
and USB ports, the USB port takes
precedence.
MIDI: The tempo synchronizes to the
MIDI clocks received via the MIDI IN
connector.
USB: The tempo synchronizes to the
MIDI clocks received via the USB port.
INT: The tempo specied on this unit is
used. Use this setting if you don’t want
to synchronize to an external device.
Parameter Value Explanation
Fill In
Trigger
Momentary,
Latch
Selects how the [FILL IN TRIG] button
works.
Momentary: A ll-in is played only
while you press the [FILL IN TRIG]
button.
Latch: A ll-in plays only when the
[FILL IN TRIG] button is pressed during
the rst half of the pattern.
If you press the [FILL IN TRIG] button
during the last half of the pattern, the
ll-in doesn’t play until the beginning
of the pattern.
Kit Select Kit, Pattern
Kit: Switching patterns does not
change the kit.
Pattern: Switching patterns changes
the kit to the kit that’s selected in the
Kit parameter of PTN SETTING.
Start
Pattern
LAST, 1-01–8-
16
Species the pattern that’s selected at
startup. When you select “LAST”, the
last selected pattern is used on startup.
Start Kit
LAST,
001–128
Species the kit that is selected at
startup. When you select “LAST”, the
last selected kit is used on startup.
* If you set a pattern that has Kit
Select set to “Pattern”, or a pattern
for which KIT Ref Sw is changed
from “ON” to Start Pattern, the Start
Kit setting is disabled.
Start Song LAST, 1–16
Species the song that is selected at
startup. When you select “LAST”, the
last selected song is used on startup.
TR-REC
Mode
Normal,
Classic
Selects how to input weak beats (weak
velocities) during TR-REC.
Normal: Hold down the [SHIFT] button
and press the step keys [1]–[16].
Classic: Each press of the step keys
[1]–[16] switches between strong, weak
and o.
Normal
Velocity
61–127
Sets the velocity value used for
inputting steps with TR-REC.
Weak
Velocity
1–60
Sets the velocity value used for
entering weak velocities with TR-REC.
Morph Edit
Mode
All Knobs,
C-Knobs
Selects the knobs whose morphing
settings you want to change.
All Knobs: Changes the settings for all
knobs.
C-Knobs: Changes the settings for
[C1]–[C6/VALUE] knobs.
Track Sync
All Tracks,
Layered
Gens
Sets the synchronization method for
the sequencer’s trigger timing.
All Tracks: Prioritizes tight
synchronization across all tracks and
externally synchronized instruments
at the expense of some latency when
externally synced.
Layered Gens: Loosens the internal
track timing slightly (except for layer
tracks) with the benet of reducing
latency when externally synced.
Start Key
Start,
Start&Stop
Sets how the [START] key functions
when pressed.
Start: Plays the sequencer.
Start&Stop: Plays/stops the sequencer.
Conguring the project
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
