Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 32 van 36
32
Conguring the project
Parameter Value Explanation
Stop Key
Stop&Cont,
Stop, None
Sets how the [STOP/CONT] key
functions when pressed.
Stop&Cont: Stops the sequencer or
resumes playback from the position
where it stopped.
Stop: Stops the sequencer.
None: Disables the operation of the
key.
SOUND
Parameter Value Explanation
Ext In Gain
-INF,
-60.0 dB–
6.0 dB (in
units of 0.1
dB)
Sets the gain.
Ext In Att. OFF, ON
When connecting a high-volume
external device to the EXTERNAL IN
jacks, set this to ON.
Ext In Mode Stereo, Mono
Sets whether the device connected
to the EXTERNAL IN jacks is stereo
or mono.
Mono1 Level 0–100%
Sets the volume level for channel
1 when the EXTERNAL IN jacks are
set to MONO.
Mono2 Level 0–100%
Sets the volume level for channel
2 when the EXTERNAL IN jacks are
set to MONO.
USB Level 0–100%
Sets the input level from the USB
EXT IN channel.
Trig In
Sync, Start,
Head, Clock
This sets how the TRG IN jack
handles trigger input signals.
Sync: Uses the trigger input as the
clock signal.
Start: Plays/stops the sequencer
when a trigger input signal is
received.
Head: Returns the playback
position to the beginning when a
trigger input signal is received.
Clock: The sequencer step
advances when a trigger input
signal is received.
Trig In Sync
Clock
1, 2, 3,
4, 6, 8,
12, 24
Sets the number of sync clocks per
beat of trigger input signal.
Trig Out
Trig, Head,
End
Sets the timing of the trigger
output from the TRIG jack.
Trig: Outputs the triggers using
the timing of the TRIGGER OUT
track.
Head: Outputs the trigger at the
beginning of the pattern.
End: Outputs the trigger at the end
of the pattern.
Sync Out Clock
1, 2, 3,
4, 6, 8,
12, 24
Sets the number of sync clocks per
beat of trigger output signal.
Filter CV In
Level
0–100%
Sets the signal input level to the
FILTER CV IN jack.
Filter CV In Inv. OFF, ON
Sets the polarity of the FILTER CV
IN jack.
PEDAL
Parameter Value Explanation
Destination
MORPH,
BD TUNE–BD CTRL3,
SD TUNE–SD CTRL3,
LT TUNE–SD CTRL3,
HT TUNE–HT CTRL3,
RS TUNE–RS CTRL,
HC TUNE–HC CTRL,
CH TUNE–CH CTRL,
OH TUNE–OH CTRL,
CC TUNE–CC CTRL,
RC TUNE–RC CTRL,
RVB LEVEL, RVB TIME,
DLY LEVEL–DLY FBK,
MFX CTRL1–MFX CTRL3,
AFX FILTER, AFX DRIVE,
START/STOP,
STOP/CONT, SHIFT, TAP
TEMPO, TAP PAD
Sets the function of the
pedal connected to the
PEDAL jack.
Polarity Normal, Inverse
Sets the polarity of the
pedal.
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
