Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 25 van 36
25
You can use the TR-1000 to sample (record) the audio input from an
external device, and assign these samples to the respective tracks.
You can also resample the internal samples and patterns.
Sampling can be done in sync with INST PLAY and with the patterns.
Sampling
This shows how to record the audio and save the sampled result to
the project.
1. Press the [SAMPLE] button.
The SAMPLING screen appears.
2. Use the controllers below to congure the
parameters.
Controller Parameter Value Explanation
[C4] knob INPUT
EXT IN,
BD–RC, MIX
OUT, TRACK
Selects the source (input
source) to sample.
EXT IN: Only the audio
input to the EXTERNAL IN
jacks is sampled.
BD–RC: Samples the BD–RC
tracks.
MIX OUT: Samples the
mixed audio (the playback
audio from this unit and
the input from an external
source).
TRACK: Selects multiple
tracks (BD–RC tracks) for
sampling.
[C5] knob LENGTH
MANUAL,
1–128
[steps]
Sets the sample time.
MANUAL: After sampling
starts, press the [ENTER]
button again to stop
sampling.
1–128: Sampling stops
automatically when the
sampling time reaches the
length specied by the
number of steps.
[C6/
VALUE]
knob
TRIGGER
MANUAL,
INST PLAY,
PTN START,
AUTO
This selects how to start
sampling.
MANUAL: Press the [ENTER]
button to start sampling.
INST PLAY: Press the step
keys [1]–[16] to start
sampling.
PTN START: Press the
[START] key to begin
sampling.
AUTO: Sampling begins
once the audio input
exceeds the level that’s
specied in INPUT.
3. Sampling starts recording with the method
specied by the TRIGGER parameter.
4. Sampling ends with the method specied by the
LENGTH parameter.
Assigning a recorded sample to a track
1. Press the [ENTER] button.
2. Use the [C3/SCROLL] knob to select
“WRITE&ASSIGN”, and press the [ENTER] button.
3. Press the track select [BD]–[RC] buttons to select
the track to which you want to assign the sample.
4. Use the [C3/SCROLL] knob to select “EXECUTE”, and
press the [ENTER] button.
The sample is assigned to the specied track and saved.
* When saving a sample, you can use the [C3/SCROLL] and [C6/
VALUE] knobs to edit the category and name.
* When you select layer tracks BD–LT, you can specify either layer A
or layer B.
* When a sample is assigned, the generator of the instrument for
that track is overwritten.
Importing audio les (samples) from a
USB ash drive
You can import an audio le as a sample from a USB ash drive.
1. Format the USB ash drive on the TR-1000 (p.
8).
2. Remove the USB ash drive.
3. On your computer, copy the audio le you want
to import into the root directory of the USB ash
drive.
4. Plug a USB ash drive into the instrument.
5. Press the [MENU] button to display the MENU
screen.
6. Use the [C6/VALUE] knob to select “FILE”, and press
the [ENTER] button.
7. Use the [C6/VALUE] knob to select “IMPORT”, and
press the [ENTER] button.
8. Use the [C6/VALUE] knob to select “USER SAMPLE”,
and press the [ENTER] button.
9. Use the [C3/SCROLL] knob to select the audio le to
import, and press the [ENTER] button.
10.
Use the [C6/VALUE] knob to select the destination
category for import, and press the [ENTER] button.
This imports the audio le.
Sampling
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
