Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 24 van 36
24
Editing the instruments
Applying eects to an instrument (FX)
Here’s how to apply eects to the instruments to change their sound.
You can apply one eect per instrument.
1. Press the track select [BD]–[RC] buttons.
2. Press the [FX] button.
3. Press the [ENTER] button.
The eect list appears.
4. Use the [C6/VALUE] knob to select an eect.
5. Press the [ENTER] button.
This applies the eect.
6. Use the [C1]–[C6/VALUE] knobs to set the values for
the parameters.
Changing parameter values with the LFO
(MOD)
This shows how to use the LFO to change the parameter values.
1. Press the track select [BD]–[RC] buttons.
2. Hold down the [SHIFT] button and press the
[FILTER] button.
The MODULATION screen appears.
3. Use the [C1]–[C6/VALUE] knobs to set the values for
the parameters.
Assigning parameters to the [CTRL] knobs
(KNOB ASSIGN)
You can assign parameters to each knob in the Instrument
controlling section to control the pattern while it plays back.
You can assign up to four parameters to a knob, and set the minimum
and maximum values per parameter corresponding to the motions of
each knob.
1. Press the [KNOB ASSIGN] button.
The KNOB ASSIGN screen appears.
2. Turn a knob for which you wish to edit the
assignment.
This selects the knob for editing.
3. Press the [÷] [ø] buttons to show the number to
assign.
4. Use the [C1]–[C6/VALUE] knobs to set the assigned
parameters, how much they change and their
minimum and maximum values.
5. Press the [EXIT] button.
This exits the screen.
Saving an instrument
After editing one of the following parameters, you can save the
parameters as a single instrument.
GEN FILTER AMP CMP FX MOD
1. Hold down the [SHIFT] button and press the [COPY]
button.
The WRITE screen appears.
2. Select “INST” with the [C6/VALUE] knob.
3. Use the [C6/VALUE] knob and the [ENTER] button to
edit the category and name.
This saves the instrument.
* When you try to overwrite an existing category or name, a
conrmation message appears. To overwrite, use the [C6/VALUE]
knob to select “OK”, and press the [ENTER] button. To cancel
overwriting, use the [C6/VALUE] knob to select “CANCEL”, and
press the [ENTER] button.
MEMO
You can use the [INST] button to recall saved instruments even
after you have changed the kit.
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
