Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 23 van 36
23
Selecting an instrument (INST BANK)
This shows how to individually select the instruments for selected
kits.
* An instrument contains all settings for the generator, lter, amp
and instrument FX, including those settings found in the track.
1. Press the track select [BD]–[RC] buttons.
2. Press the [INST] button.
The INST BANK screen appears.
3. Use the [C4] knob to select the category.
4. Use the [C5] knob to select the folder.
5. Use the [C6/VALUE] knob to select the instrument.
6. Press the [INST] or [EXIT] button.
The [INST] button goes dark and the unit exits the INST BANK
screen.
* You can check the name of the selected instrument or the data for
the generator by pressing the [INST] button while holding down
the [SHIFT] button.
Selecting the generator (SELECT GEN)
This shows how to individually select the generator for the selected
instrument.
1. Press the track select [BD]–[RC] buttons.
When [BD]–[LT] is selected, use the LAYER [A] [B] buttons to select
layer A/B.
2. Hold down the [SHIFT] button and press the [GEN]
button.
The SELECT GEN screen appears.
3. Use the [C4] knob to select the category.
4. Use the [C5] knob to select the folder.
5. Use the [C6/VALUE] knob to select the generator.
6. Press the [GEN] or [EXIT] button.
The [GEN] button goes dark and the unit exits the SELECT GEN
screen.
Changing the generator sound (GEN)
1. Press the track select [BD]–[RC] buttons.
When [BD]–[LT] is selected, use the LAYER [A] [B] buttons to select
layer A/B.
2. Press the [GEN] button.
3. Press the [÷] [ø] buttons to select the page to set.
4. Use the [C1]–[C6/VALUE] knobs to set the values for
the parameters.
Applying the lter (FILTER)
Here’s how to apply the lter to the generator.
1. Press the track select [BD]–[RC] buttons.
When [BD]–[LT] is selected, use the LAYER [A] [B] buttons to select
layer A/B.
2. Press the [FILTER] button.
The FILTER screen appears.
3. Use the [C1]–[C6/VALUE] knobs to set the values for
the parameters.
Selecting an amp (AMP)
This shows how to make the volume change over time.
1. Press the track select [BD]–[RC] buttons.
When [BD]–[LT] is selected, use the LAYER [A] [B] buttons to select
layer A/B.
2. Press the [AMP] button.
The AMP screen appears.
3. Use the [C1]–[C6/VALUE] knobs to set the values for
the parameters.
Applying the compressor (CMP)
This eect reduces high volume levels while bringing up the level of
quieter sounds, keeping down any variations in overall volume.
1. Press the track select [BD]–[RC] buttons.
2. Hold down the [SHIFT] button and press the [AMP]
button.
The COMPRESSOR screen appears.
3. Use the [C1]–[C6/VALUE] knobs to set the values for
the parameters.
Editing the instruments
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
