Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 26 van 36
26
Sampling
Editing a sample
When the instrument generator is set to User Sample, you can adjust
(normalize) the level of a sample, or extract parts of the sample.
1. Hold down the [SHIFT] button and press the
[SAMPLE] button.
The sample edit screen appears.
2. Use the [C6/VALUE] knob to select the parameter,
and press the [ENTER] button.
3. Press the [EXIT] button.
This exits the sample edit screen.
Using samples in an instrument
Conguring the SAMPLE GEN
When the instrument generator is set for sampling, you can set the
tempo and pitch of the sample.
1. Press the [GEN] button.
2. Use the [÷] [ø] buttons to display the menu for the
rst page.
3. Use the controllers below to edit the sample.
Controller Parameter Explanation
[C1] knob TUNE
Smoothly adjusts the pitch of the
sample.
[C2] knob SLICE NUM
Selects the number of the slice you
want to edit.
* This can only be set when slice
mode is ON.
[C3/SCROLL]
knob
SPEED
Sets the overall playback speed
without changing the pitch.
* This can only be set when stretch
mode is ON and BPM SYNC is OFF.
[C4] knob PITCH
Changes the pitch of the sample in
semitones.
[C5] knob BPM SYNC
When this is ON, the sample plays
back at the tempo set on the TEMPO
SETTING screen (p. 28).
[C6/VALUE]
knob
STRETCH Sets stretch mode.
Ø For details on the parameter’s value, refer to the “Reference Manual”
(Roland website).
Slicing a sample
When the instrument generator is set for sampling, you can slice the
samples.
1. Press the [GEN] button.
2. Use the [÷] [ø] buttons to show the WAVE screen.
3. Use the [C4] knob to turn on slice mode.
The sample is automatically sliced into 16 segments (divided by
time).
4. Use the following controllers to set the slice
settings, and press the [ENTER] button.
Controller Parameter Explanation
[C1] knob START Sets the position at which the slice starts.
[C2] knob SELECT Selects the slice.
[C3/
SCROLL]
knob
LENGTH Sets the slice length.
[C4] knob
SLICE ON/
OFF
Turns slice mode ON/OFF.
[C5] knob CURSOR
Controls the cursor to indicate where to
slice. Use the [SHIFT] button along with
the knob to switch loop playback ON/
OFF.
[C6/VALUE]
knob
ZOOM Zooms the waveform.
[ENTER]
button
MENU
Displays parameters such as adding or
deleting slices and auto-slicing.
For details, refer to the “Reference
Manual” (Roland website).
Ø For details on the parameter’s value, refer to the “Reference Manual”
(Roland website).
Recording a slice with step recording (TR-
REC)
You can record a sliced sample with step recording.
1. Long-press a step key [1]–[16].
The STEP EDIT screen appears.
2. Select the slice number with the [C6/VALUE] knob.
3. Release your nger from the step keys [1]–[16].
This exits the STEP EDIT screen.
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
