Roland TMC-6 handleiding
Handleiding
Je bekijkt pagina 9 van 32
9
Connecting the TMC-6
TRIG 1/2/3/4/5
Connect optional pads, drum triggers, foot switches, or other such devices.
When using a stereo cable to connect a PD-80R/120 (when using rim shots),
connect the cable to TRIG 2 (SNARE).
TRIG 6/HH CTRL
You can connect the pad types listed above, or connect a hi-hat control pedal.
By connecting a hi-hat control pedal, you can switch open and close of the
pad connected to TRIG 5, or control the MIDI messages like Control Change
or Aftertouch (p. 25).
Connecting a pad
1.
Move the TRIG 6/HH CTRL switch to TRIG 6.
The following appears in the display. The pad is now ready for use.
fig.02-02
Turning on the power with the TRIG 6/HH CTRL switch set to TRIG 6
automatically enables use of pads with the TMC-6.
Connecting a Hi-Hat Control Pedal
1.
C
onnect the hi-hat control pedal (FD-7, FD-6) to the TRIG 6/HH CTRL jack.
fig.02-03
2.
Make sure that the pedal is fully open.
3.
Move the TRIG 6/HH CTRL switch to TRIG 6 and then move it back to HH CTRL.
The following appears in the display, and the hi-hat control pedal is now
ready to be used.
fig.02-04
Furthermore, turning on the power with a hi-hat control pedal connected and
the TRIG 6/HH CTRL switch set to HH CTRL automatically enables the
TMC-6 to use the hi-hat control pedal.
You can also use a foot switch instead of a hi-hat control pedal (p. 20).
If the trigger type is set to
“” or ““
when the pad is connected
via a single cable, the
sound will not be played.
In addition to TRIG 2
(SNARE), you can also use
the PD-80R/120 by
connecting an optional
cable (PCS-31) to two
trigger inputs to support
rim shots (p. 18).
Do not strike the pad when
changing the switch
position; this degrades the
pad response when the
pads are struck lightly.
TRIG 6/HH CTRL
Switch
Mono Cable
Do not press the hi-hat
control pedal when
changing the switch
position; this prevents
proper functioning of the
hi-hat’s opening and
closing control.
For more detailed
information on each
parameter, refer to the
"Parameter List" (p. 24).
Bekijk gratis de handleiding van Roland TMC-6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TMC-6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4217 MB |
