Roland S-0808 handleiding
Handleiding
Je bekijkt pagina 12 van 36
12
Connecting Input and Output Devices
Connect amps and powered speakers to OUTPUT 1 through 8. OUTPUT 1 through 8 on the S-0808 are male connectors. Use
female XLR connectors to make the connections.
fig.output-connection.eps
The signal level that is output is +4 dBu (nominal, maximum output: +22 dBu).
If the input to the connected amps or powered speakers is too high and the audio output is distorted, adjust the gain using the input attenuator
for the amp. Adjusting by lowering the preamp gain on the S-0808 may result in a poor signal-to-noise ratio.
Connecting Amps and Speakers
Bekijk gratis de handleiding van Roland S-0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | S-0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5626 MB |
