Roland MC-707 handleiding
Handleiding
Je bekijkt pagina 12 van 21
MC-707 Update – Functions Added in Ver.1.50
1212
Deleting a scene
1.
Hold down the [CLEAR] button and press a SCENE [1]–[4]
button to delete the scene.
¹
To delete a scene 5–8, hold down the [CLEAR] and the [SHIFT] button,
and press a SCENE [1]–[4] button.
TYPE2 operation
Recalling a scene
1.
Press a SCENE [1]–[4] button to select a scene bank.
¹
To select banks 5–8, hold down the [SHIFT] button and press a SCENE
[1]–[4] button.
If you want to change to a bank 1–4 after selecting a bank 5–8,
hold down the [SHIFT] button once again and press a SCENE [1]–[4]
button.
¹
You can use 16 scenes per bank.
2.
Press a step [1]–[16] button to recall a scene.
After pressing a SCENE [1]–[4] button, you have three seconds to
select a scene for recall.
MEMOMEMO
When PAD MODE is MUTE, you can use the step [1]–[16] buttons to directly
recall a scene.
Saving a scene
1.
Long-press a SCENE [1]–[4] button to select a scene bank.
¹
To select banks 5–8, hold down the [SHIFT] button and press a SCENE
[1]–[4] button.
If you want to change to a bank 1–4 after selecting a bank 5–8,
hold down the [SHIFT] button once again and press a SCENE [1]–[4]
button.
¹
You can use 16 scenes per bank.
2.
Hold down a SCENE [1]–[4] button and press a step [1]–[16]
button to save the scene.
Deleting a scene
1.
Press a SCENE [1]–[4] button to select a scene bank.
2.
Hold down the [CLEAR] button and press a step [1]–[16]
button to delete the scene.
After pressing a SCENE [1]–[4] button, you have three seconds to
select a scene for delete.
MEMOMEMO
When PAD MODE is MUTE, you can hold down the [CLEAR] button and press a
step [1]–[16] button to directly delete a scene.
Parameter Added to MIDI Input/Output Function
The following parameter is added to the clip settings (MIDI tab).
Parameter Value Explanation
Tx Program
Change Number
Default
The program change number 0–15 corresponding to the
clip number is transmitted when you select a clip and
when the clip has switched.
OFF A program change number is not transmitted.
PC000–
127
The specied program change number is transmitted
when the clip has switched.
This function is convenient when you want the clip
and the sound of an external sound module to change
together.
MEMOMEMO
¹
The TRACK SETTING parameter Tx MIDI Program Change must be set
to “ON”. For details, see “Reference Manual” (PDF).
¹
The program change number is transmitted when you press the
[ENTER] button in the setting screen.
Added Shortcuts
Action Operation
Copy the contents of the drum
kit pads
In the KIT EDIT screen of the drum track, hold down the
[FUNC] button and press the cursor [
] button.
Paste the contents of the drum
kit pads
In the KIT EDIT screen of the drum track, hold down the
[FUNC] button and press the cursor [
] button.
Problems and Functions Corrected
¹
When using Auto Channel, notes that are input from an external MIDI
device are now output.
¹
Fixed the problem in which a value specied in the CHORD setting screen
sometimes failed to be updated.
¹
Improved the processing speed of NOTE SHIFTER.
¹
Fixed the problem in which the STEP value specied in MOTION DRAWER
failed to be updated.
¹
Fixed the problem in which copying did not occur correctly for STEP 2 in
the step copy/paste function.
¹
Fixed the problem in which a CC (control change message) sometimes
failed to be output when a track’s knobs ([FILTER], [MOD], [FX]) were
operated.
Bekijk gratis de handleiding van Roland MC-707, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-707 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4073 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 2100 g |
| Breedte | 426 mm |
| Diepte | 263 mm |
