Roland MC-707 handleiding
Handleiding
Je bekijkt pagina 13 van 21
MC-707 Update – Functions Added in Ver.1.30
1313
Functions Added in Ver.1.30
Clip Chain Function Added
The clip chain function lets you play back a specied clip at the desired
timing.
You can use the clip chain function to create a song that plays back
clips in succession, or use it to specify a ll-in.
The following settings are added to the CLIP SETTING screen.
Parameter Value Explanation
NEXT CLIP
Species the clip that plays next, and how it operates.
STAY Play the same clip as currently.
STOP Stops clip playback.
CLIP 1–16 Plays the specied clip.
LENGTH
Species the timing of the next operation.
OFF
The next operation occurs when the clip plays
to the end.
1–512
Species the timing of the next operation in
units of steps.
* You can make settings from the MEASURE EDIT screen in the same way.
MIDI Input/Output Functions Added
Now you can specify the numbers of the CC (control change) messages
that are transmitted by the [FILTER] knob, [MOD] knob, and [FX] knob.
The following items are added to the track settings (MIDI tab).
Parameter Value Explanation
Tx FILTER CC
Number
CC0, CC1, CC2…CC119
Species the CC number transmitted by
the [FILTER] knob.
Tx MOD CC Number CC0, CC1, CC2…CC119
Species the CC number transmitted by
the [MOD] knob.
Tx FX CC Number CC0, CC1, CC2…CC119
Species the CC number transmitted by
the [FX] knob.
Auto Channel Function Added
Incoming MIDI messages are sent to the track selected by the [SEL]
button.
This function is convenient when a MIDI keyboard etc. is connected.
The following item is added to the system settings (MIDI tab).
Parameter Value Explanation
MIDI Rx Auto
Channel
OFF, CH1, CH2, CH3…
CH16
If there is input on the specied MIDI
channel, those MIDI messages are sent to
the track selected by the [SEL] button.
Audio Insert Function Added
The audio insert function lets you use the MC-707 like a mixer.
Audio that is input to the EXT IN jacks or the stereo RETURN jacks is
inserted before the MFX of the specied track.
The following item is added to the track settings (GENERAL tab).
Parameter Value Explanation
AudioInsert
OFF The audio insert function is not used.
EXT IN L/R
The signal that is input to EXT IN L/R is inserted
as a stereo signal.
EXT IN L The signal that is input to EXT IN L is inserted.
EXT IN R The signal that is input to EXT IN R is inserted.
RETURN L/R
The signal that is input to RETURN L/R is
inserted as a stereo signal.
RETURN R
The signal that is input to RETURN IN R is
inserted.
RETURN L
The signal that is input to RETURN IN L is
inserted.
NOTENOTE
Feedback will occur if you connect an eect processor etc. to the SEND jacks
and the RETURN jacks, and then set Audio Insert to RETURN for the track that is
specied as the SEND/RETURN POS.
Note Repeat Function Added
You can use the Note Repeat function when pad mode is set to CHORD
on a drum track.
The note is repeated at the specied speed.
Action Operation
Repeat the note Press a pad [1]–[16].
Specify the speed at
which notes repeat
While holding down a pad [1]–[16] or the [CHORD] button, press a
step [1]–[6] button.
step [1]: 1/4
step [2]: 1/4t
step [3]: 1/8
step [4]: 1/8t
step [5]: 1/16
step [6]: 1/16t
Bekijk gratis de handleiding van Roland MC-707, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-707 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4073 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 2100 g |
| Breedte | 426 mm |
| Diepte | 263 mm |
