Roland MC-101 handleiding
Handleiding
Je bekijkt pagina 9 van 21
MC-101 Update – Functions Added in Ver.1.71
99
Scene Chain Function Added
You can now chain scenes together and play them back.
This feature plays back scenes in order from scene 1-1 to the numbers
that follow. (1-1
Ó
1-2
Ó
1-3
Ó
...)
Chaining and playing back scenes
1.
Hold down the [CLIP] button and press the [SEQ] button.
The SCENE screen is displayed.
2.
Hold down the [SHIFT] button and press the pad
corresponding to the scene you want to edit.
The SCENE CHAIN screen appears.
Parameter Value Explanation
LENGTH OFF–127
Sets how long it takes before the scene changes.
This sets how many master clocks occur before switching to the
next scene.
CHAIN OFF, ON
Switches the scene chain on/o.
You can also hold down the [SHIFT] button on the SCENE screen
and press the [VALUE] dial to turn this on/o.
Count-In Function Added
The following parameter was added to the SYSTEM SETTING (CTRL
tab).
Parameter Value Explanation
Count-In Stp OFF, 1–128
Sets the count-in. When this is on, a count-in plays
before recording begins, and the count-in length is
set to the number of steps you specify. The output
destination for the count-in is the same as for the
metronome.
When this is set to a number from 1 to 128, the
metronome sounds during count-in, regardless of the
metronome’s on/o setting.
Added Functions to the Chord Designer
The following parameters were added to the Chord Designer.
Parameter Explanation
WRITE ALL TYP1
Generates chords ascending chromatically in parallel from a
single chord.
This writes a chord to each pad by changing the KEY setting for
each, based on the parameter you set.
WRITE ALL TYP2
Generates chords that ascend along the notes of the scale.
This writes a chord to each pad by changing the ROOT setting
for each, based on the parameter you set.
Audio Insert Function Added
Use this function to insert audio from a device connected via USB or
outputted tracks into a track. Audio input from the PC IN or outputted
tracks are inserted before the MFX of the specied track.
The following settings were added to the TRACK SETTING (GEN tab).
Parameter Value Explanation
Insert
OFF The audio insert function is not used.
PC IN L/R Inserts the signal input from PC IN as a stereo signal.
PC IN L
Inserts the signal input from the left channel of PC IN as a
stereo signal.
PC IN R
Inserts the signal input from the right channel of PC IN as a
stereo signal.
TRACK1–3
Inserts the selected track as a stereo signal before the MFX.
* You can insert a track whose number is less than the track that’s
set.
* You can’t insert a track at track 1.
* Lower the faders for tracks containing inserted audio that are not
outputted.
* To congure MFX that dier for each clip in the audio insert’s track,
set “Sound Src” to “CLIP”.
Added Functions to the Looper Track
BPM Sync parameter added
The following parameter was added to TRACK SETTING (GEN tab) for
looper tracks.
Parameter Value Explanation
BPM Sync OFF, ON
When this is set to ON, the playback speed for the
phrase changes according to the BPM.
Set this to OFF if you don’t want the playback speed to
change.
Export function added
The following function was added to the LOOPER MENU for looper
tracks.
Function Operation Explanation
EXPORT CLIP
Hold down the [SHIFT] button
and press the [SOUND] button,
and select with the [VALUE]
dial
Press the [VALUE] dial to save the
selected clip to the SD card as a WAV
le.
* Clips are saved in ascending
numerical order to the ROLAND/
GROOVEBOX/SAMPLE/EXPORT
folder.
Delay/Reverb Send Added to PC IN
The following parameters were added to PROJECT SETTING (PC IN tab).
You can add delay or reverb to the input signal from PC IN.
Parameter Value Explanation
PC Dly Send 0–255 Adjusts the amount sent to the total eect delay.
PC Rev Send 0–255 Adjusts the amount sent to the total eect reverb.
Functions Added in Ver.1.71
Bekijk gratis de handleiding van Roland MC-101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-101 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3816 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 716 g |
| Breedte | 224 mm |
| Diepte | 132 mm |
