Roland MC-101 handleiding
Handleiding
Je bekijkt pagina 8 van 21
MC-101 Update – Functions Added in Ver.1.80
88
Problems and Functions Corrected
¹
Arpeggios can now be played via external MIDI.
* This is only enabled when you use an external keyboard to
transmit the channel set in “Auto Ch”, SYSTEM SETTING (MIDI).
¹
The program changes sent for clips now conform to LSB/MSB. This can
be congured from the CLIP EDIT screen.
¹
The issue with playback getting delayed when synchronized via MIDI
has been xed.
¹
The issue with the mode not changing in SCENE EDIT even when the
[SEQ] button is pressed has been xed.
¹
The issue with the Chord Designer not opening when a clip is empty
has been xed.
¹
The issue with notes not getting imported when importing an SMF le
if the 128th step is a note-o message has been xed.
¹
MIDI messages whose “Rx–” in TRACK SETTING (MIDI) is “ON” when
importing an SMF le can now be imported.
¹
The issue with total eects being incorrectly applied to the preview
playback sound of WAV les has been xed. Also, the preview playback
sound of WAV les is no longer output to USB.
¹
The issue with Pan and Level not being applied when importing clips
from another project le has been xed.
¹
In the MOTION tab on the STEP EDIT screen, the steps that did not
contain motion data at the beginning were not shown. This has been
changed to show the maximum motion value written within the step. (If
data exists at the beginning of the step, the display of the starting data
is prioritized.)
¹
The issue where the motion is slow to follow at the beginning of the
step when SAW, ARC or SQR are selected in the MOTION DESIGNER has
been improved.
¹
The issue where the MFX is not correctly applied when the clips for
multiple tracks that are set to the same MIDI channel and all switch at
the same time when a program change message is received has been
xed.
¹
The issue where notes outside of the range are not muted and play
unwanted notes when generating chords using the Chord Designer has
been xed.
¹
The scene number now blinks when the next scene is standing by
(reserved) in the scene chain.
¹
The issue with the scatter eect not being applied even though the
[SCATTER] button was pressed has been xed.
¹
The issue where the scatter eect triggered by the pads does not turn
on depending on the timing, or turns o at a shorter length than what
was set for Pad Quantize has been xed.
¹
The MIDI Start that was output when the count-in starts has been
corrected, so that it now outputs after the count-in ends.
¹
The issue where the [START/STOP] button doesn’t work during the pre-
count for the count-in has been xed.
¹
The issue where unrelated parameters are changed in a clip when STEP
SHIFT is executed in the STEP EDIT screen has been xed.
¹
The issue where the clip’s sound is incorrect when selected while the
clip chain is playing back has been xed.
¹
The issue in which clips do not correctly play back when copied using
“COPY: CLIP SOUND” (LOOPER track) has been xed.
¹
The issue with quantization not being correct when you raise the “S.Qtz
Clip” or “S.Qtz Mstr” value from the OFF setting in the QUANTIZE
SETTING screen has been xed.
¹
Clips (.mvc) created on the MC-707 or on the MV-1 can now be
imported. Save the clips to either the ROLAND/GROOVEBOX/CLIP/
DRUM folder, the ROLAND/GROOVEBOX/CLIP/TONE folder or the
ROLAND/GROOVEBOX/CLIP/LOOPER folder.
¹
Other minor problems have been xed.
Bekijk gratis de handleiding van Roland MC-101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-101 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3816 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 716 g |
| Breedte | 224 mm |
| Diepte | 132 mm |
