Roland MC-101 handleiding
Handleiding
Je bekijkt pagina 4 van 21
MC-101 Update – Functions Added in Ver.1.80
44
Exciter, Phonograph and JD Multi Added to MFX
An Exciter eect has been added to the Filter category, a Phonograph
eect has been added to the Lo- category, and a JD Multi eect has
been added to the Combination category.
Exciter
This adds dynamics to the sound, by dynamically bringing up the high
end using a split-band compressor.
L out
Low
Mid
High
L in
Compressor
Compressor
Channel
Divider
R out
Low
Mid
High
R in
Compressor
Compressor
Channel
Divider
Parameter Value Explanation
Band2 Th -80.0–0.0 (dB)
Raises the midrange frequency levels when
they fall below the specied amount.
Band2 Gain 0–+24 (dB)
Sets how much to raise the levels when the
midrange volume is low.
Band3 Th -80.0–0.0 (dB)
Raises the high-end frequency levels when
they fall below the specied amount.
Band3 Gain 0–+24 (dB)
Sets how much to raise the levels when the
high-end frequency volume is low.
Split1 F 2000–5000 (Hz)
Frequency at which the low and midrange
frequencies are split
Split2 F 3000–10000 (Hz)
Frequency at which the midrange and high-
end frequencies are split
Level 0–127 Output Level
Phonograph
Recreates the sound of an analog record being played on a record
player. This lets you simulate the unique noises produced when a
record is played, as well as the variations that occur when the record
spins.
Balance W
Balance D
Balance D
R outR out
L outL out
BalanceW
L inL in
PhonographPhonographPhonographPhonograph
R inR in
PhonographPhonographPhonographPhonograph
Parameter Value Explanation
Signal Dist 0–127 Sets the amount of distortion.
Freq Range 0–127
Sets the frequency characteristics of the playback system.
Smaller values create the feeling of an older system with
narrow frequency bands.
Disc Type LP, EP, SP
Sets the turntable rotation speed.
This has an eect on the scratch noise cycle.
Scratch NZ 0–127 Sets the volume of noise created by scratches in the record.
Dust NZ 0–127 Sets the volume of noise created by dust on the record.
Hiss NZ 0–127 Sets the volume of continuous hiss noise.
Total NZ 0–127 Sets the volume of noise overall.
Wow 0–127 Sets the amount of variation in record spin (long cycle).
Flutter 0–127 Sets the amount of variation in record spin (short cycle).
Random 0–127 Sets the amount of non-cyclical variation in record spin.
Parameter Value Explanation
Total W/F 0–127 Sets the volume of variation in record spin overall.
Balance
D100: 0W
-D0: 100W
Sets the volume balance between the original sound (D)
and the eect sound (W).
Level 0–127 Sets the output volume.
JD Multi
Recreates the eects included in group A of the JD-800.
L inL in
R inR in
L outL out
R outR out
SpectrumSpectrumSpectrumSpectrum
DistortionDistortionDistortionDistortion
PhaserPhaserPhaserPhaser
EnhancerEnhancerEnhancerEnhancer
Parameter Value Explanation
Seq
DS - PH - SP - EN
Selects the connection order of the eects.
DS: Distortion
PH: Phaser
SP: Spectrum
EN: Enhancer
DS - PH - EN - SP
DS - SP - PH - EN
DS - SP - EN - PH
DS - EN - PH - SP
DS - EN - SP - PH
PH - DS - SP - EN
PH - DS - EN - SP
PH - SP - DS - EN
PH - SP - EN - DS
PH - EN - DS - SP
PH - EN - SP - DS
SP - DS - PH - EN
SP - DS - EN - PH
SP - PH - DS - EN
SP - PH - EN - DS
SP - EN - DS - PH
SP - EN - PH - DS
EN - DS - PH - SP
EN - DS - SP - PH
EN - PH - DS - SP
EN - PH - SP - DS
EN - SP - DS - PH
EN - SP - PH - DS
DS Switch OFF, ON Turns the distortion on/o.
DS Typ
Sets the type of distortion.
MELLW DRV Softer distortion with a slightly darker sound.
OVERDRIVE
Distortion that resembles a vacuum tube amp
being driven.
CRY DRV Distortion that emphasizes the high end.
MELLOW DS
Gives the feeling of distortion playing through a
large amp.
LIGHT DS Strong distortion with a bright sound.
FAT DS
Thick distortion that emphasizes the low and high
ends.
FUZZ DS Distortion that’s even more powerful that FAT DS.
DS Drive 0–100 Sets the amount of distortion.
DS Level 0–100 Sets the distortion output level.
PH Switch OFF, ON Turns the phaser on/o.
PH Manual
50 [Hz]–
15.0 [kHz]
Sets the basic frequency from which the sound is
modulated with the phaser eect.
PH Rate 0.1–10.0 [Hz] Sets the cycle of the phaser modulation.
PH Depth 0–100 Sets the depth of the phaser modulation.
PH Resonance 0–100
Sets the amount of feedback for the phaser.
Increasing the value creates a more unusual
sound.
Bekijk gratis de handleiding van Roland MC-101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-101 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3816 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 716 g |
| Breedte | 224 mm |
| Diepte | 132 mm |
