Roland MC-101 handleiding
Handleiding
Je bekijkt pagina 5 van 21
MC-101 Update – Functions Added in Ver.1.80
55
Parameter Value Explanation
PH Mix 0–100 Sets the level of the phase-shifted sound.
SP Switch OFF, ON Turns the spectrum on/o.
SP Band1 -15–+15 [dB]
Sets the gain (amount of boost/cut) in the 250 Hz
range.
SP Band2 -15–+15 [dB]
Sets the gain (amount of boost/cut) in the 500 Hz
range.
SP Band3 -15–+15 [dB]
Sets the gain (amount of boost/cut) in the 1000
Hz range.
SP Band4 -15–+15 [dB]
Sets the gain (amount of boost/cut) in the 2000
Hz range.
SP Band5 -15–+15 [dB]
Sets the gain (amount of boost/cut) in the 4000
Hz range.
SP Band6 -15–+15 [dB]
Sets the gain (amount of boost/cut) in the 8000
Hz range.
SP Width 1–5
Sets the bandwidth for changing the levels,
common to all bands.
EH Switch OFF, ON Turns the enhancer on/o.
EH Sens 0–100 Sets how easily the enhancer eect is applied.
EH Mix 0–100
Sets the ratio at which the harmonics generated
by the enhancer are mixed with the original
sound.
Pan L64–63R Changes the pan.
Level 0–127 Sets the output volume.
Scatter Step Edit Function Added
You can now edit the scatter function in steps.
1.
Hold down the [SHIFT] button and press the PAD [SCATTER]
button.
The SCATTER EDIT MENU screen appears.
STEP 1–16 can now be selected on the SCATTER EDIT menu screen.
See the Reference Manual (p. 31) for the parameters that can be
controlled.
Volume Setting Added for WAV File Preview Playback
“WAV Prv.Lv” has been added to the project settings.
Added Setting for Battery Type
You can now select the type of batteries you’re using on this unit.
This setting allows the unit to notify you when the battery is low
(“Battery Low”) or when the unit must automatically shut down
(“Shutdown”) due to a drop in voltage.
1.
Hold down the [SHIFT] button and press the [FILTER]
(UTILITY) button.
2.
Select “SYSTEM”, and then set “Batt Type” to “ALKL” (alkaline
batteries) or “NiMH” (rechargeable Ni-MH batteries).
Recording Messages from External MIDI Devices as Motions
You can record control change messages and other MIDI messages
inputted from an external MIDI device as motions.
The following parameters were added to TRACK SETTING (MIDI).
Parameter Value Explanation
Rx ModWheel ON, OFF
CC 1: You can select whether to apply
modulation to a track or record it to a clip.
Rx BrthCtrl ON, OFF
CC 2: You can select whether to apply breath
control to a track or record it to a clip.
RX FootCtrl ON, OFF
CC 4: You can select whether to apply foot
control to a track or record it to a clip.
Rx Volume ON, OFF
CC 7: You can select whether to apply main
volume to a track or record it to a clip.
RX Pan ON, OFF
CC 10: You can select whether to apply
panning to a track or record it to a clip.
Rx Exp ON, OFF
CC 11: You can select whether to apply
expression to a track or record it to a clip.
Rx Hold-1 ON, OFF
CC 64: You can select whether to apply damper
pedal to a track or record it to a clip.
Rx RevSend ON, OFF
CC 91: You can select whether to apply reverb
send to a track or record it to a clip.
Rx ChoDlySend ON, OFF
CC 93: You can select whether to apply chorus
send to a track or record it to a clip.
Rx ChPress ON, OFF
You can select whether to apply channel
pressure to a track or record it to a clip.
Rx P.Bend ON, OFF
You can select whether to apply pitch bend to
a track or record it to a clip.
* The parameters shown are dierent depending on the type of the
selected track.
* When this is set to OFF, the parameter in question is not recorded. Set
this to ON before recording a parameter.
* You can record up to four parameters in addition to pitch bend
for each clip. If more than four parameters are input, they are not
recorded.
* Recorded parameters are not applied if they are set to OFF.
* To delete recorded motions, delete the applicable motions as shown
in “Deleting Motion” of the Reference Manual (p. 27).
* You can edit the MIDI messages recorded in a motion from the step
edit screen.
* From the step edit (EDIT STEP) screen in “Editing Motion” that’s
mentioned in the Reference Manual (p. 27), each time you press the
[VALUE] dial, the page switches on the MOTION screen, where you
can view and edit the recorded MIDI messages.
Bekijk gratis de handleiding van Roland MC-101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | MC-101 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3816 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 716 g |
| Breedte | 224 mm |
| Diepte | 132 mm |
