Roland EARTH Piano handleiding
Handleiding
Je bekijkt pagina 22 van 59
2222
MFX parameter list
Parameter Value Explanation
Rate (Hz) 0.05–10.00 [Hz] Frequency of modulation
Rate (note) 1/64T, 1/64,
1/32T, 1/32,
1/16T, 1/32D,
1/16, 1/8T,
1/16D, 1/8, 1/4T,
1/8D, 1/4, 1/2T,
1/4D, 1/2, 1/1T,
1/2D, 1/1, 2/1T,
1/1D, 2/1
Attack 0–127 Speed at which the cuto frequency
changes between steps
Filter Type LPF, BPF, HPF,
NOTCH
Type of lter
Frequency range that will pass
through each lter
LPF: Frequencies below the cuto
BPF: Frequencies in the region of
the cuto
HPF: Frequencies above the cuto
NOTCH: Frequencies other than the
region of the cuto
Filter Slope -12, -24, -36 [dB] Amount of attenuation per octave
-12 dB: Gentle, -24 dB: Steep, -36
dB: Extremely steep
Filter
Resonance
0–127 Filter resonance level
Increasing this value will emphasize
the region near the cuto frequency.
Filter Gain 0–+12 [dB] Amount of boost for the lter output
Level 0–127 Output Level
Enhancer
Controls the overtone structure of the high frequencies, adding sparkle and
tightness to the sound.
L in L out
R outR in
Mix
Mix
Enhancer 2-Band EQ
2-Band EQEnhancer
Parameter Value Explanation
Sens 0–127 Sensitivity of the enhancer
Mix 0–127 Level of the overtones generated by
the enhancer
Parameter Value Explanation
Low Gain -15–+15 [dB] Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-
frequency range
Level 0–127 Output Level
Exciter
L in
R in
L out
R out
High
Mid
Low
High
Mid
Low
Channel
Divider
Compressor
Compressor
Channel
Divider
Compressor
Compressor
Parameter Value Explanation
Split1
Frequency
(BAND2
(MID)FLT)
200–500 Sets the frequency at which the low
and middle frequency ranges are
split.
Band2
Thereshold
-800–0 Sets the threshold value for the
middle frequency range.
A gain eect is applied when the
middle frequency range volume falls
below the threshold.
Band2 Max
Gain
0–24 Sets the level to which the sound is
raised when the middle frequency
range volume falls below the
threshold.
Split2
Frequency
(BAND3
(HIGH)
FLT )
300–1000 Sets the frequency at which the
middle and high frequency ranges
are split.
Band3
Threshold
-800–0 Sets the threshold of the high
frequency range.
A gain eect is applied when the
high frequency range volume falls
below the threshold.
Parameter Value Explanation
Band3 Max
Gain
0–24 Sets the level to which the sound
is raised when the high frequency
range volume falls below the
threshold.
Level 0–127 Sets the output volume.
Auto Wah
Cyclically controls a lter to create cyclic change in timbre.
L in L out
R outR in
Auto Wah 2-Band EQ
Auto Wah 2-Band EQ
Parameter Value Explanation
Filter Type LPF, BPF Type of lter
LPF: The wah eect will be applied
over a wide frequency range.
BPF: The wah eect will be applied
over a narrow frequency range.
Manual 0–127 Center frequency at which the wah
eect is applied
Peak 0–127 Width of the frequency region at
which the wah eect is applied
Increasing this value will make the
frequency region narrower.
Sens 0–127 Sensitivity with which the lter is
modied
Polarity UP, DOWN Direction in which the lter will
move
UP: The lter will change toward a
higher frequency.
DOWN: The lter will change toward
a lower frequency.
Rate (sync
sw)
OFF, ON Synchronize to the tempo of the
DAW if this is ON.
Bekijk gratis de handleiding van Roland EARTH Piano, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | EARTH Piano |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12466 MB |
