Neewer QPRO-F handleiding
Handleiding
Je bekijkt pagina 8 van 20
How to use: Using the Q4 as an example.
1. Turn off the camera, place the flash trigger on
the camera hot shoe mount and turn on both
the flash trigger power switch and the camera.
(Note: For other models of external flash settings,
please follow the corresponding external flash
instruction manual.)
2. Press and hold the <Zm/CH> button to set the channel, group, mode and apply
settings (see Setting the flash unit for details).
3. Power on the external flash and press the < > wireless setting button until the
< > icon appears. Hold the < > button for 2 seconds to select the channel
icon, then turn the dial to match the channel number on the trigger. Press <MENU>
to enter menu mode, then turn the dial to match the ID number on the trigger.
4. Press the camera shutter to activate the flash. The "status indicator" of the flash unit
will flash red.
Wireless sync of external flash
How to Use the Trigger
EN
08
Wirelessly triggered camera shutter
How to connect:
Two Qpro-F triggers are required for connection:
one connects to your camera as a receiver and the
other as a transmitter.
1. Turn off your camera first, then connect one end
of a shutter release cable to the camera's shutter
port and the other end of the cable into the
Qpro-F receiver's "2.5mm Sync Port". Next
turn on the camera followed by the receiver.
2. Press the receiver's <MENU> button, then rotate
the dial to select <SYNC> and set it to "OUT".
※ When the <CH> channel setting and the <ID> setting are the same for both the
external flash and the QPRO-F, the QPRO-F can control the external flash.
Bekijk gratis de handleiding van Neewer QPRO-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neewer |
| Model | QPRO-F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1629 MB |
