Neewer QPRO-F handleiding

Handleiding

1234567891011121314151617181920/ 20

Afdrukken

Je bekijkt pagina 9 van 20

3. Set the Qpro-F transmitter and the receiver on the same channel and under the same

wireless ID. Long press <Zm/CH> button to change channel. Short press <MENU> and

choose <ID> to set wireless ID. (To set mode and other settings, please check the

"Trigger Settings" part of this manual for more detailed instructions.)

4. Half press the transmitter's trigger button < > which will make the indicator turn

green to focus. Fully press the trigger button < > and the indicator turns red, then

release the button to release the camera shutter to shoot.

Connection with a 2.5mm sync cable

How to use:

1. Connect one end of the 2.5mm Sync cable

to a speedlite flash's sync port, and other

other end to a QZ receiver's sync port.

2. Press and hold the receiver's (QR) <M>

button to set as flash < >.

3. Set the Qpro-F transmitter and the QZ

receiver on the same channel and to the

same wireless ID. Long press <Zm/CH>

button to change channel, short press

<MENU> and choose <ID> to set wireless

ID. (To set mode and other parameters,

please check the "Trigger Settings" part

of this manual for more detailed instructions.)

4. Trigger the flash with the Qpro-F transmitter.

EN

09

How to Use the Trigger

1234567891011121314151617181920/ 20

Bekijk gratis de handleiding van Neewer QPRO-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Neewer (Niet gecategoriseerd)

Handleiding bekijken

Neewer QZ-N

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd