Livarno Lux IAN 378861 handleiding
Handleiding
Je bekijkt pagina 21 van 84
17 GB/IE
membranes with the chemicals! Flush immedi-
ately the affected areas with fresh water and
seek medical attention!
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries/
rechargeable batteries can cause
burns on contact with the skin. Wear suitable
protective gloves at all times if such an event
occurs.
In the event of a leakage of batteries/recharge-
able batteries, immediately remove them from
the product to prevent damage.
Only use the same type of batteries/ recharge-
able batteries. Do not mix used and new batter-
ies/rechargeable batteries.
Remove batteries/rechargeable batteries if the
product will not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery/recharge-
able battery!
Insert batteries/rechargeable batteries accord-
ing to polarity marks (+) and (-) on the battery/
rechargeable battery and the product.
Use a dry lint-free cloth or cotton swab to clean
the contacts on the battery/rechargeable battery
and in the battery compartment before inserting!
Remove exhausted batteries/ rechargeable
batteries from the product immediately.
Preparation
Required tools and material
The specified tools and materials are not included.
The information and values specified are non-bind-
i
ng and are only provided as a reference. The natu
re
of the material is determined by the specific local
conditions.
– Pencil/ marking tool
– 2-pole voltage tester
– Cross-tip screwdriver
– Slotted screwdriver
– Power drill (approx. Ø 6mm)
– Side cutters
Mounting the LED light panel
DANGER OF ELECTRIC
SHOCK!
Important: The electrical connection must be
established by a qualified electrician or a person
trained to perform electrical installations. This per-
son must be familiar with the properties of the light
and the connection regulations. To do so, remove
the fuse or switch off the circuit breaker in the fuse
box (0 setting) (see Fig. A).
Remove the screws
8
visible at the side of the
mounting bracket
2
and remove the mounting
bracket.
Use the holes in the mounting bracket
2
inte
nded
for the screws
4
to mark the drill holes.
Now drill the mounting holes. Be sure not to
damage the power cable.
Insert the wall plugs
5
into the drill holes
(see Fig. B).
Secure the mounting bracket
2
using the
screws
4
provided (see Fig. B).
Connect the connection cable of the LED light
panel
1
with the mains connection cable (exter-
nal)
7
using the lustre terminal
9
(see Fig. B).
Be sure to correctly connect the individual con-
ductors of the mains connection cable (external)
7
: live conductor, black or brown = symbol L,
neutral conductor, blue = symbol N.
Ensure that it is positioned correctly.
Now attach the LED light panel
1
to the mount-
ing bracket
2
using the screws
8
.
Note: Make sure that the screws
8
are
properly engaged.
Reinstall the fuse or switch on the circuit breaker
in the fuse box (I setting) (see Fig. C).
Your LED light panel is now ready to use.
Inserting/ replacing batteries
(remote control)
Note: The batteries
6
are included in the scope
of delivery and must be inserted prior to the first use.
If the range of the remote control
3
reduces,
the batteries
6
need to be replaced. To do
378861_2101_V3.0_livh_LED-Panel mit fließenden Farbeffekten_content_OS.indd 17 17.06.21 09:29
Bekijk gratis de handleiding van Livarno Lux IAN 378861, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 378861 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7904 MB |
