Livarno Lux IAN 378861 handleiding
Handleiding
Je bekijkt pagina 22 van 84
18 GB/IE
this, remove the battery compartment cover
from the remote control
3
in the direction of
the arrow.
Remove the batteries
6
and insert the new
batteries
6
. The battery type is specified in
the chapter “Technical data”.
Note: The correct polarity is indicated in the
battery compartment.
Replace the battery cover on the battery
compartment.
The remote control
3
is now ready to use.
Initial use
Switching the light on and off/
adjusting the light colour
Use the light switch (wall switch) to switch the
LED light panel
1
on or off.
If you press the light switch repeatedly in quick
succession, the LED light panel
1
switches be-
tween cold, warm and neutral white.
Controlling light effects with
the remote control
Note: Ensure there are no obstacles between the
remote control
3
and the receiver. The range of
the remote control
3
is approx. 6m.
Choose from the following functions
(see Fig. D):
: Switching the product on / off
: Nightlight (10% white light)
K+
: Switching from warm to cold white
K-
: Switching from cold to warm white
+
: 1. Increase brightness 2. Speed up random
programme
: 1. Decrease brightness 2. Slow down random
programme
: Adjust cold white/neutral white/warm white
: 4 colour flows programmes can be set: “Blue
wave”, “Green sky”, “Dreamer”, “Volcano”
: Press once: random programme 1,
Press twice: random programme 2 etc.
Note: There are a total of 11 random programmes.
: Start-/pause button: continue/resume light
programme
: Select the desired colour (red, green or blue)
: Flowing colour change
Maintenance and cleaning
DANGER OF ELECTRIC
SHOCK! Disconnect the light from the power sup-
ply before cleaning. To do so, remove the fuse or
switch off the circuit breaker in the fuse box (0 setting)
(see Fig. A).
To prevent burns, ensure that the lamp has been
switched off and has cooled down before
touching it.
Do not use solvents, petrol, etc. These will
damage the lamp.
Use a dry, lint-free cloth to clean the LED light
panel
1
.
Reinstall the fuse or switch on the circuit breaker
in the fuse box (I setting) (see Fig. C).
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and fibre-
board/80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
378861_2101_V3.0_livh_LED-Panel mit fließenden Farbeffekten_content_OS.indd 18 17.06.21 09:29
Bekijk gratis de handleiding van Livarno Lux IAN 378861, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 378861 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7904 MB |
