Livarno Lux IAN 283481 handleiding
Handleiding
Je bekijkt pagina 8 van 37
8 GB/IE/NI
Initial use / Installing the … / Switching the LED … / Installing / replacing the batterySafety / Initial use
Prevent fire and injury
hazards
This product does not contain any parts that
can be serviced by the user. The LEDs cannot
be replaced.
The lamp‘s light source is not replaceable, the
entire light needs to be replaced if the light
source reaches the end of its service life.
Do not look into the LED from a close distance
during operation.
Do not look at the LED with an optical instrument
(e.g. magnifier).
Due to the extremely fast speed
of light exchange, it could lead to eyesight im-
pairments in children or disabled persons (e.g.
due to mental illness).
Safe working
Do not leave the LED strip or packaging mate-
rial lying unattended. The packaging material
presents a suffocation hazard and there is a
risk of loss of life from strangulation.
Install the light so that it is protected from dirt
and excessive heating.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never use the LED strip if you are having diffi-
culty concentrating or do not feel well.
Before use, familiarise yourself with all the in-
structions and diagrams in these instructions, as
well as with the LED strip itself.
To completely disconnect the LED strip from the
power supply, the USB plug must be disconn
ected
from the connected device.
Safety Instructions for
Batteries
DANGER TO LIFE! Batteries
are not intended for children. If accidentally
swallowed seek immediate medical attention!
CAUTION!
EXPLOSION HAZARD! Never
recharge non-rechargeable batteries,
do not short-circuit and / or open batteries!
Never throw batteries into fire or water!
Do not exert mechanical loads to batteries!
Risk of battery leakage
In the event of a battery leak, immediately re-
move it from the device to prevent damage!
Avoid contact with the skin, eyes and mucous
membranes! In the event of contact with battery
acid, thoroughly flush the affected area with
plenty of clean water and seek immediate me-
dical attention!
A
void extreme conditions and temperatures wh
ich
may affect the batteries, e.g. on radiators / in
direct sunlight.
Remove the battery from the device if it will not
be used for a prolonged period!
Risk of equipment damage
Only use the specified battery type!
Please note the correct polarity when inserting
the battery! This is shown on the battery com-
partment!
If necessary, clean the battery and device
contacts before inserting the battery!
Promptly remove drained batteries from the
product!
Initial use
Remove all packaging materials before first use.
Connecting the LED strip
The LED strip
1
may be connected individually.
DANGER TO LIFE BY ELEC-
TRIC SHOCK! Disconnect the lights from the power
supply before performing any work on the LED strip
1
. To do this, remove the USB plug
3
from the USB
connector.
Connect the LED strip
1
using the plug-in
connectors
2
.
Bekijk gratis de handleiding van Livarno Lux IAN 283481, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 283481 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2965 MB |
