Livarno Lux IAN 283481 handleiding
Handleiding
Je bekijkt pagina 7 van 37
7 GB/IE/NI
Scope of delivery
Check immediately after unpacking that the parts are
complete and that the product is in proper condition.
1 LED strip with USB connector
3 LED strips (each 50 cm)
3 Connectors (each 35 cm)
3 Direct connectors
1 Remote control
1 Cable holder
1 Set of assembly instructions and instructions for use
Parts Description
1
LED strip
2
Plug-in connector
3
USB plug
4
Remote control
5
Cable holder
Technical Data
Model no.: 14120005L
Operating voltage: SELV 5 V
LED strip: 4 x 12 LED max. 2.5 W
Protection class: III /
Protection type: IP20
LED non-replaceable
Safety
Safety instructions
Damage due to failure to comply with these instruc-
tions for use will void the warranty! We assume no
liability for consequential damages! We assume no
liability for property damage or personal injury due
to improper handling or failure to comply with the
safety instructions!
Avoid the risk of fatal injury
from electric shock
Check the LED strip for damage before every
use. Never use the LED strip if any damage is
detected.
A damaged mains cable poses
a risk of fatal injury from electrical shock. In
the case of damage, repairs or other problems,
please contact the service centre or a qualified
electrician. The supply cable of this appliance
cannot be replaced. If the cable is damaged,
the appliance must be disposed of. The appli-
ance contains no parts which may be serviced
by the consumer.
Make sure before use that the available supply
voltage corresponds to the required operating
voltage of the item (see ″Technical Data″).
Never allow the live power leads and contacts
to come into contact with water or other liquids.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Do not install the lamp on damp or conductive
surfaces.
This LED strip must not be connected electroni-
cally with other LED strips.
Protect the product from sharp edges, mechani-
cal loads and hot surfaces.
Do not secure with sharp staples or nails.
Disconnect the USB plug from the connected
device before assembly, dismantling or cleaning.
Never touch the plug or the LED strip with wet
hands.
Only use the individual parts supplied, other-
wise all warranty claims will become invalid.
This item must not be connected with the power
supply while it is still in its packaging provided
that the packaging has not been adjusted for
exhibition purposes. Lay out the item completely
before you connect it to the device.
Introduction Introduction / Safety
Bekijk gratis de handleiding van Livarno Lux IAN 283481, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 283481 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2965 MB |
