JANDY CD100 handleiding
Handleiding
Je bekijkt pagina 17 van 24
Page 17
Jandy
®
Pro Series Ozone Generator
6. Turn on electrical power.
7. Turn on the pump.
8. Verify that the metal ball in the ow meter assembly oats
between the Max and Min lines (Figure 10).
MAX
MIN
Figure 10. Ideal Ozone Flow Reading
9. If ozone gas ow is too low, verify that other valves in the system
are not inhibiting ow through the manifold.
NOTE: The manifold injector comes equipped with a spring-loaded valve
to provide a wide operating range and is not adjustable. For
additional complications related to ozone gas ow, see Section 6.
Troubleshooting.
10. Remove the ow meter assembly from the ozone outlet barb
and from the ozone tube. Store the ow meter tubing inside the
ozone generator housing for future use.
11. Cut off any excess tubing so that the line from the injector
manifold to the ozone generator is straight and free from dips
and loops.
12. Connect the end of the ozone tube to the ozone outlet barb.
Ensure that all hose barb connections are secured with hose
clamps. Secure and route any slack tubing as necessary, to
minimize tripping or entanglement hazard.
Bekijk gratis de handleiding van JANDY CD100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JANDY |
| Model | CD100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2422 MB |
