Indesit Push&Go IN2FE13DT9WUK handleiding

Vaatwasser

Indesit

50 pagina's

PDF beschikbaar

Handleiding

EN / 41

Lower spray arm

Check the lower spray arm (1) holes for

blockage. If there is a blockage, remove

and clean the spray arm. You can remove

the lower spray arm by pulling it upwards

(depending on model)

Check whether the holes of the spray arm

assembly are blocked. If there is a block-

age, remove and clean the spray arm as-

sembly. (depends on the model)

To disassemble and clean the lower spray

arm assembly together, remove it by grasp-

ing the points (C) shown in the figure with

one hand and pulling it upwards. After

cleaning, reinstall the spray arm assembly

by reversing the same procedure.

Do not try to rotate the spray arm

by holding it by its ends. Attempting

to turn the spray arm by its ends

may cause the gear system inside

the spray arm to break.

Upper spray arm

Check the upper spray arm (1) holes for

blockage. If there is a blockage, remove

and clean the spray arm. You can remove

the upper spray arm by turning the nut to

the left.

Make sure that the nut is fully tightened

when replacing the upper spray arm.

Bekijk gratis de handleiding van Indesit Push&Go IN2FE13DT9WUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.