Indesit Push&Go IN2FE13DT9WUK handleiding

Vaatwasser

Indesit

50 pagina's

PDF beschikbaar

Handleiding

EN / 40

2. Pull out the metal/plastic filter (3).

3. Press the two latches on the coarse fil-

ter inwards to separate the coarse filter

from the group.

4. Clean all three filters under the tap with

a brush.

5. Replace the metal/plastic filter.

6. Insert the coarse filter into the microfil-

ter. Make sure that it is positioned cor-

rectly. Turn clockwise until it clicks.

The dishwasher must not be used

without filters.

Failure to install the filters correctly

will reduce the washing efficiency.

8.3 Cleaning the hose filter

The dishwasher is prevented from being

damaged by dirt (sand, clay, rust, etc.) from

the mains or your water supply system by

means of a filter in the water inlet hose.

Check the filter and hose from time to time

and clean them if necessary.

1. Switch off the tap and disconnect the

hose.

2. After removing the filter from the hose,

clean it under the tap.

3. Place the cleaned filter back in its

place in the hose.

4. Attach the hose to the tap.

(depends on the model)

8.4 Cleaning the spray arms

Clean the spray arms at least once a week

for efficient dishwasher operation.

Bekijk gratis de handleiding van Indesit Push&Go IN2FE13DT9WUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.