Indesit IN2IC10BS7A0 handleiding
Handleiding
Je bekijkt pagina 1 van 16
ENQuick Guide
1
Program
Programs description
Drying
phase
Auto Door
Available
options
*)
Duration
of wash
program
(h:min)
**)
Water con-
sumption
(litres/
cycle)
Energy con-
sumption
(kWh/
cycle)
1.
Eco 50°- Program is suitable to clean normally soiled tableware, that for this use,
it is the most ecient programme in terms of its combined energy and water
consumption, and that it is used to assess compliance with the EU Ecodesign
legislation.
3:35 8.7 0.59
2.
Auto Intensive 65°- Automatic program for heavily soiled dishes and pans (not
to be used for delicate items).
2:00 - 3:10 14.0 - 17.0 1.50 - 1.85
3.
Auto Mixed 55° - Automatic program for normally soiled pans and dishes.
1:20 - 3:00 7,0 - 14,0 0,70 - 1,10
4.
Half Load 55°- Ideal for washing a half load of lightly or normally soiled crockery.
1:20 11.0 1.00
5.
Rapid 30’ 45° - Program to be used for half load of lightly-soiled dishes with no
dried food residues. Without drying.
-
0:30 9.0 0.50
6.
Extra Hygiene 65° - Normally or heavily soiled crockery, with additional antibacteri-
al wash. Can be used to perform maintenance of the dishwasher.
-
1:50 12.0 1.30
7.
Extra 50° - Program that allows to wash very big items loaded in the lower rack.
Please apply detergent directly to tub instead of detergent dispenser. Upper
rack should be removed with this cycle.
-
-
1:30 11.0 1.20
8.
Pre-Wash - Use to refresh crockery planned to be washed later. No detergent to
be used with this program.
- -
0:10 4.5 0.01
9.
Push&GO 50° - Everyday wash and dry cycle that ensures great cleaning perfor-
mance in a short time without the need to pre-treat dishes.
1:25 11.5 1.10
THANK YOU FOR BUYING AN INDESIT PRODUCT.
In order to receive a more complete assistance, please
register your appliance on: www.indesit.com/register
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Only the rst time you do this: ll the salt reservoir
with water.
3. Position the funnel (see gure) and ll the salt reservoir
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on heater, contributing also to better cleaning e-
ciency. This system regenerates itself with salt, therefore it is required
to rell salt container when empty.
Frequency of regeneration depends on water hardness level setting - re-
generation takes place once per 6 Eco cycles with water hardness level set
to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse
aid dispenser A should be lled when the RINSE
AID REFILL indicator light in the control pan-
el is lit.
NEVER pour the rinse aid directly into the
appliance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser D only. Place the amount of detergent for
pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
CONTROL PANEL
FIRST TIME USE
More information in the Daily Reference Guide on website.
PROGRAMS TABLE
1 2 3 4 5 6 7 8 9
10
1. ON-OFF / Reset button with
indicator light
2. Program selection button
3. Salt rell indicator light
4. Rinse Aid rell indicator light
5. Program number and delay
time indicator
6. Tablet (Tab) indicator light
7. Display
8. Push & Go button
9. Delay button
10. START/Pause button with
indicator light / Tablet (Tab)
Bekijk gratis de handleiding van Indesit IN2IC10BS7A0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Indesit |
| Model | IN2IC10BS7A0 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3570 MB |
