Indesit Push&Go IN2FE13DT9WUK handleiding

Vaatwasser

Indesit

50 pagina's

PDF beschikbaar

Handleiding

EN / 42

9 Troubleshooting

9.1 Error Codes, Causes and Solutions

Error Code Cause Solution

E01 Warning

P1 Blinks

Power led flashes

Chassis water filling fault

1-Error algorithm is activated.

2-Cycle ends.

If you see the error continuously,

1-Cut off the electricity.

2-Close the valve.

3-Get in touch with the authorized

service.

E02 Warning

P2 Blinks

The Water outage icon illuminates.

The Washing led illuminates.

Water outage error Check the water supply.

Filter is blocked

1-Cut off the electricity connection.

2-Cut off the water connection.

3-Remove water inlet hose.

4-Check and clean the filter.

5-Establish the water connection.

6-Establish the electricity connection.

Other

If the error continues,

1-Close your dishwasher.

2-Get in touch with the authorized

service.

E06 Warning

P2 flashes

P6 flashes

Temperature sensor in the dish-

washer is faulty

If you see this error continuously and

washing performance has reduced,

1-Close your dishwasher.

2-Get in touch with the authorized

service.

E07 Warning

P2 flashes

F1 and F2 flashes

Flowmeter is faulty

1-Error algorithm is activated.

2-Cycle ends.

If you see the error continuously,

1-Cut off the electricity.

2-Close the valve.

3-Get in touch with the authorized

service.

The error codes can change de-

pend the model.

9.2 Troubleshooting

Machine does not work.

• The mains plug may not be plugged in.

>>> Check that the mains plug is plugged

in.

• The fuse may have blown. >>> Check the

fuses in your house.

• Water may not be coming out. >>> Make

sure that the water inlet tap is open.

Bekijk gratis de handleiding van Indesit Push&Go IN2FE13DT9WUK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.