Eizo ColorEdge ColorNavigator 7 Handleiding (99 Pagina's)

Handleiding

28

Chapter 3 Basic Usage

Note

• When the “Use the same measurement device next time” checkbox is selected, the currently selected

measurement device will be automatically selected the next time.

5.

To use an external measurement device, install the measurement device on the

measurement window.

The installation method varies by the measurement device. For details, refer to the User's Manual of

the respective measurement device.

Attention

• Depending on the settings of the monitor and the OS, the measurement window may not appear in the center

of the screen. If that happens, install the measurement device close to the center of the monitor regardless of

where the measurement window is located.

Measurement device used by being in contact with the monitor

Tilt the monitor panel surface slightly upward and install the measurement device to the measurement

window.

Calibrating CG3145 / CG3146 / CG1

Install the measurement device on a tripod or a similar xing base, and place it approximately 5 cm to

20 cm away from the panel surface.

Attention

• If the measurement is taken while the monitor is in contact with the panel, the results will not turn out to be

accurate due to the accumulated heat.

Bekijk gratis de handleiding van Eizo ColorEdge ColorNavigator 7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.