Handleiding
Je bekijkt pagina 10 van 20
17
18
Specificaons/statement
Tweeter: Horn Loaded Ribbon Tweeter
Mid-Woofer: 5 inch Aluminum Cone Underhung Design Neodymium Power
Mid-Woofer
Amplifier System: Digital Amplifier with Xmos Processor
Power Output: L/R (Treble): 10W+10W, L/R (Woofer): 40W+40W
Frequency Range: 52Hz-40KHz
Signal-Noise Rao: L/R: ≥85dB(A)
Input Mode: AUX, PC, USB, Opcal, Bluetooth.
The USB, Opcal inputs support up to 192KHz input sample rate
Input Sensivity: AUX: 450±50mV
PC: 550±50mV
USB: 400±50mFFs
Opcal: 400±50mFFs
Bluetooth: 450±50mFFs
Sub Out : 800mV Max(Changes as the master volume changes)
Mains Voltage: 100-240V AC 50/60Hz
Cabinet Size (WxHxD): 160x283x255mm
Net Weight: 11Kg (24 Pounds) / Set
NOTICE: For the need of technical improvement and system upgrade, informaon
contained herein may be subject to change from me to me without prior noce.
AIRPULSE A100
Bluetooth
Or
VOLUME / INPUT
VOLU ME / INPUT
1. Press the “ ” buon on the remote control or press the “VOLUME / INPUT” buon
on the rear panel of the acve speaker to select Bluetooth input mode, LED indicator
on the acve speaker will display “ ”.
2. Set your Bluetooth device to search for and connect to “AIRPULSE A100”; pin code for
connecon is “0000” if needed.
Operaons may be different between different devices, please refer to the operaonal
instrucons aached with the devices.
* Effecve Bluetooth connecon distance is within 10 meters.
* The Bluetooth of A100 can only be searched and connected in Bluetooth input.
The exisng Bluetooth connecon will be disconnected once the speaker is switched into
other audio inputs. When switched to Bluetooth input, the speaker will try to connect
to the Bluetooth device connected last me.
* To disconnect Bluetooth, press and hold the “ ” buon on the remote control for above
2 seconds.
* To enjoy all Bluetooth funcons please ensure your audio device has A2DP and AVRCP
profiles.
* When connected to this product, Bluetooth connecvity and funcons may be different
between different Bluetooth devices, depending on soware sengs of Bluetooth devices.
3. Play music on the connected Bluetooth device, press the “+/-” buon on the remote
control or press the “VOLUME / INPUT” buon on the rear panel of the acve speaker
to adjust volume to a desired level.
Or
VOLUME / INPUT
VOLU ME / INPUT
Bluetooth Input Mode
English English
Bekijk gratis de handleiding van Edifier Airpulse A100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edifier |
| Model | Airpulse A100 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 5279 MB |
