Handleiding
Je bekijkt pagina 1 van 7
2. What’s in the box?
Note:
•Images are for illustrative purpose only and may dier from the actual product.
•For the need of technical improvement and system upgrade, information and
specications contained herein may be slightly dierent from actual product. If
any dierence is found, the actual product prevails.
6. Bluetooth stereo pairing
4. Power on/o
7. Play control
8. Phone calls
9. Light eects
10. Specications
11. Troubleshooting
Quick start guide Important safety instructions
StrapUSB-C to USB-C audio cable
Cleaning cloth
Speaker
Manual
Cannot connect to your Bluetooth device
•Make sure that the distance between this product and your Bluetooth device
is less than 10 meters and there are no obstacles between them.
•Make sure that no device is connected to this product via Bluetooth.
•Make sure that this product is in Bluetooth pairing mode. If not, manually
switch it to this mode.
•Resta this product, enable Bluetooth function on your Bluetooth device,
and then t again.
•Reset this product to facto settings and t again.
No sound
•Make sure that this product and your device is properly connected.
•Make sure that the correct audio input source is selected.
•Make sure that the playback is not paused.
•Increase the volume of this product and your device.
Noise coming from speakers
•EDIFIER speakers generate little noise, while the background noise of some
audio devices is too high. Please unplug audio cables and turn the volume
up. If no sound can be heard at 1 meter away from the speaker, there is no
problem with this product.
To learn more about EDIFIER, please visit www.edier.com
For EDIFIER warranty queries, please visit the relevant count page on
www.edier.com and review the section titled Warranty Terms.
USA and Canada: seice@edier.ca
South America: Please visit www.edier.com (English) or
www.edierla.com (Spanish/Pouguese) for local contact information.
With this app, you can
•Control play from the Bluetooth
source device,
•Control the master volume,
•Switch EQs,
•Select or customize light eects,
•Upgrade the rmware, and
•More functions.
Download EDIFIER ConneX app
1. With your sma device, scan the QR code on the quick sta guide or the
packaging.
•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or
Google Play (Android devices).
2. Download and install the app.
How to use this app
1. Connect your sma device with the speaker via Bluetooth.
2. In Bluetooth mode, open EDIFIER ConneX App on your sma device.
3. Tap the menu for settings and playback control.
EDIFIER ConneX app
3. Charging
Note:
•Power input: 5 V 2 A
•"7" is the minimum power required by the radio equipment to charge.
"9" is the maximum power required by the radio equipment to achieve
maximum charging speed.
EN
1. EDIFIER ConneX mobile app
5. Bluetooth connection
Poable Bluetooth Speaker
QS20
7-9
W
Bluetooth
Settings
EDIFIER QS20
DEVICES
Bluetooth
2:12
5V 2A
OFFON
1.5s
1.5s
When the speaker is not under charging, it will automatically power o if there
are no audio playback and operation for 30 minutes.
This function is enabled by default. You can disable it in the menu of "Settings" →
"Power saving mode" on EDIFIER ConneX App.
Bluetooth
Settings
EDIFIER QS20
DEVICES
Bluetooth
2:12
This speaker suppos the simultaneous connection of two Bluetooth devices.
Connect to a device
1. If no device is connected, the speaker will auto-enter Bluetooth pairing mode
after powered on (LED blinking in blue). If not, press and hold the "+" and "-"
buttons for 1.5 seconds.
2. On your device, select "EDIFIER QS20" in its Bluetooth device list to connect,
and the blue LED will be steady lit when the connection is established.
•To disconnect from the current Bluetooth device, press and hold the "+" and "-"
buttons for 1.5 seconds.
Connect to two devices
1. Connect to a device, and then press and hold the "+" and "-" buttons for 1.5
seconds (LED blinking in blue).
2. On the second device, select "EDIFIER QS20" in its Bluetooth device list to
connect, and the blue LED will be steady lit when the connection is established.
3. On the rst device, select "EDIFIER QS20" in its Bluetooth device list to reconnect.
•Pause or stop playback on the current Bluetooth device before streaming audio
from the second one.
Note:
•Pin code for connection is "0000" if needed.
•To enjoy all Bluetooth functions of this product, make sure that your audio
source device suppos HFP, A2DP and AVRCP proles.
•If no device is connected in 10 minutes, the speaker will switch to Bluetooth
hidden mode. The blue indicator will blink slowly. In this mode, (1) new devices
cannot nd the speaker, but (2) for a device that exists in the pairing record of
this speaker, you can select "EDIFIER QS20" from its Bluetooth device list to
reconnect. To exit from Bluetooth hidden mode, press " " button on the
speaker.
•After powered on, the speaker will reconnect to the last connected devices
automatically.
Pair two QS20 speakers to enjoy stereo sound.
1. Double press the " " button on the rst QS20. The white LED will be in
breathing pattern.
2. Double press the " " button on the second QS20. The white LED will be in
breathing pattern.
• Once the connection is established, the blue LED on the rst QS20 will be
steady lit or blink fast, and the white LED on the second QS20 will light o.
3. Connect the rst QS20 to your Bluetooth device and sta playing.
• To exit the stereo mode, double press the " " button.
Note:
• The rst QS20 will work as the master speaker. You can control play on the rst
QS20.
• The rst QS20 will deliver the right channel audio and the second one is for the
left channel audio.
x2
①
x2
②
①
②
x1
x1
x1
x1
x1 ：
x2 ：
：
Declaration for EU
Frequency Band: 2.402 GHz ~ 2.480 GHz
RF Power Output: ≤13 dBm (EIRP)
There is no restriction of use.
Total output power (RMS): 6 W
Frequency response: 87 Hz~20 kHz
Bekijk gratis de handleiding van Edifier QS20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edifier |
| Model | QS20 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2573 MB |
