Handleiding
Je bekijkt pagina 1 van 7
Manual
EN
1. EDIFIER Home mobile app
Power cable
2. What’s in the box?
EDIFIER Home mobile app
Note: Make sure that Bluetooth function is enabled on your device.
1. With your sma device, scan the QR code on the quick sta guide or the
packaging.
•You can also search for "EDIFIER Home" in Apple App Store (iOS devices) or
Google Play (Android devices).
2. Download and install the app.
3. Connect your sma device and the speaker to your Wi-Fi network.
4. Open the EDIFIER Home App on your sma device.
5. Tap the menu for settings and playback control.
Speaker
Remote controlUSB-C to USB-C audio cable
3.5 mm to 3.5 mm audio cable
Note:
•Images are for illustrative purpose only and may dier from the actual product.
•The bundled USB connecting cable is for audio streaming only. Do not use it for
device charging.
•For the need of technical improvement and system upgrade, information and
specications contained herein may be slightly dierent from actual product. If
any dierence is found, the actual product prevails.
Note:
•Power input: 100-240 V~ 50/60 Hz 750 mA
•This plug type is meant for illustrative purpose only.
Note:
The following operating systems suppo USB audio streaming: Windows 11,
Windows 10, Windows 8, and Windows 7.
Note:
In AUX and USB modes, volume sync is not suppoed. To adjust the volume,
adjust on the speaker and your device separately.
Power saving function
(1) In Bluetooth (or AirPlay) mode, the speaker will enter power saving mode after
15 minutes of inactivity (no audio playback and operation) if any Bluetooth device
(or Wi-Fi router) is connected. When playback resumes, it will return to working
mode in about 1 second.
(2) In Bluetooth (or AirPlay) mode, the speaker will automatically power o after
15 minutes of inactivity (no operation) if no Bluetooth device (or Wi-Fi router) is
connected.
(3) In AUX or USB audio streaming mode, the speaker will automatically power
o after 15 minutes of inactivity (no audio playback and operation).
Note: This function is enabled by default. To disable or re-enable this function,
lower the volume to 0 and double-press the volume knob. The indicator will blink
once to conrm the function has been disabled. Otherwise, the indicator will blink
twice. You can also disable or re-enable this function in the menu of "Settings" >
"Power saving mode" on EDIFIER Home App.
This speaker suppos the simultaneous connection of two Bluetooth devices.
The multipoint connection feature is disabled by default. To enjoy the feature,
enable it in the menu of "Settings" > "Multipoint connection" on EDIFIER Home App.
Connect to a device
1. Press the volume knob on the speaker or the " " button on the remote control
to switch to Bluetooth input mode. If no device is connected, the speaker will
auto-enter Bluetooth pairing mode (LED blinking in blue). If not, press and hold
the volume knob on the speaker or the " " button on the remote control for 1.5
seconds.
2. On your device, select "EDIFIER S300" in its Bluetooth device list to connect,
and the blue LED will be steady lit when the connection is established.
•To disconnect from the current Bluetooth device, press and hold the volume
knob on the speaker or the " " button on the remote control for 1.5 seconds.
Connect to two devices
1. Connect to a device, and then press and hold the volume knob on the speaker
or the " " button on the remote control for 1.5 seconds (LED blinking in blue).
2. On the second device, select "EDIFIER S300" in its Bluetooth device list to
connect, and the blue LED will be steady lit when the connection is established.
3. On the rst device, select "EDIFIER S300" in its Bluetooth device list to reconnect.
•Pause or stop playback on the current Bluetooth device before streaming audio
from the second one.
Note:
•Pin code for connection is "0000" if needed.
•To enjoy all Bluetooth functions of this product, make sure that your audio
source device suppos A2DP and AVRCP proles.
•If no device is connected in 10 minutes, the speaker will switch to Bluetooth
hidden mode. The blue indicator will blink slowly. In this mode, (1) new devices
cannot nd the speaker, but (2) for a device that exists in the pairing record of
this speaker, you can select "EDIFIER S300" from its Bluetooth device list to
reconnect. To exit from Bluetooth hidden mode, press the volume knob on the
speaker or the " " button on the remote control.
•After switched to Bluetooth input, the speaker will reconnect to the last
connected devices automatically.
Quick start guideAAA battery Important safety instructions
3. Cable connection
Tabletop Wireless Speaker
S300
EDIFIER Home app
6. Bluetooth connection
5. Source selection
4. Power on/o
7. USB connection
10. Specications
Total output power (RMS): Treble: 15 W+15 W, Mid-bass: 50 W
Frequency response: 48 Hz~40 kHz
Declaration for EU
Frequency Band (Bluetooth): 2.402 GHz ~ 2.480 GHz
Frequency Band (Wi-Fi): 2.400 GHz ~ 2.4835 GHz, 5.15 GHz ~ 5.35 GHz,
5.47 GHz ~ 5.725 GHz, 5.725 GHz ~ 5.85 GHz
RF Power output (Bluetooth): ≤13 dBm (EIRP)
RF Power output: ≤20 dBm (EIRP) (5.725 GHz ~ 5.850 GHz excluded)
RF Power output: ≤14 dBm (EIRP) (5.725 GHz ~ 5.850 GHz)
11. Troubleshooting
Cannot connect to your Bluetooth device
•
Make sure that the distance between this product and your Bluetooth device
is less than 10 meters and there are no obstacles between them.
•
Make sure that no device is connected to this product via Bluetooth.
•
Make sure that this product is in Bluetooth pairing mode. If not, manually
switch it to this mode.
•
Resta this product, enable Bluetooth function on your Bluetooth device,
and then t again.
No power
•
Make sure that the power cable is properly connected.
•Make sure that the power supply is not disconnected.
No sound
•
Make sure that this product is powered on.
•
Make sure that this product and your device is properly connected.
•
Make sure that the playback is not paused.
•
Make sure that this product and your device are not muted.
•
Increase the volume of this product and your device.
Noise coming from speakers
•
EDIFIER speakers generate little noise, while the background noise of some
audio devices is too high. Please unplug audio cables and turn the volume
up. If no sound can be heard at 1 meter away from the speaker, there is no
problem with this product.
To learn more about EDIFIER, please visit www.edier.com
For EDIFIER warranty queries, please visit the relevant count page on
www.edier.com and review the section titled Warranty Terms.
USA and Canada: seice@edier.ca
South America: Please visit www.edier.com (English) or
www.edierla.com (Spanish/Pouguese) for local contact information.
9. Apple AirPlay
8. Play control
Wi-Fi Network conguration
•Make sure that your device is connected to your Wi-Fi network before connecting
the speaker.
•Make sure that Bluetooth function is enabled on your device.
•Methods 1, 2 and 3 are applicable for Apple devices. After connected, the following
devices can stream audio to the speaker via Apple AirPlay: (1) Mac or PC with iTunes
12.8 or later; (2) iPhone, iPad, and iPod touch with iOS 11.4 or later; (3) Apple TV 4K
or Apple TV (4th Generation) with tvOS 11.4 or later; (4) Other devices that suppo
AirPlay.
•Method 3 is applicable for Android devices. After connected, you can use your
device to control play and change settings via the EDIFIER Home App.
Method 1: Apple WAC (Wireless Accesso Conguration)
1. Press the volume knob on the speaker or the " " button on the remote control to
switch to AirPlay mode manually.
2. Make sure that the volume is not set to 0, and then press and hold the volume knob
on the speaker or the " " button on the remote control for 1.5 seconds (white LED
blinking rapidly).
3. Access the WLAN setting on your sma device.
4. Select "EDIFIER S300 xxxx" from the AirPlay speaker list to sta the AirPlay setup.
5. Follow the on-screen instructions to complete the setup (white LED steady lit).
Method 2: Apple Home App
1. Press the volume knob on the speaker or the " " button on the remote control to
switch to AirPlay mode manually.
2. Make sure that the volume is not set to 0, and then press and hold the volume knob
on the speaker or the " " button on the remote control for 1.5 seconds (white LED
blinking rapidly).
3. Open the Apple Home App on your sma device.
4. Tap "+" and then select "Add or Scan Accesso".
5. Follow the on-screen instructions to complete the setup (white LED steady lit).
Method 3: EDIFIER Home App
1. Press the volume knob on the speaker or the " " button on the remote control to
switch to AirPlay mode manually.
2. Make sure that the volume is not set to 0, and then press and hold the volume knob
on the speaker or the " " button on the remote control for 1.5 seconds (white LED
blinking rapidly).
3. Open the EDIFIER Home App on your sma device.
4. Tap "+" behind "Devices" and then select "EDIFIER S300".
5. Follow the on-screen instructions to complete the setup (white LED steady lit).
White
Input
Indicator
AUX
Green Red
USB AirPlay
Blue
ONOFF
x1
ONOFF
*
x1
x1
x1
AUX
USB
x1
x1
x1x1
Bluetooth
Settings
EDIFIER S300
DEVICES
Bluetooth
2:12
EDIFIER S300
EDIFIER S300
AUX
/ / USB /
AUX
/ / USB
/ / USB
x1
/ / USB
x1
AUX
x1
/ / USB
AUX
/ / USB /
3 4
AirPlay Setup
Cancel Done
Setting up this AirPlay speaker to join
“My Wi-Fi”.
Joining My Wi-Fi...
2:12
AirPlay Complete
Done
This AirPlay speaker joined “My Wi-Fi”.
2:12
AirPlay Complete
Done
This AirPlay speaker joined “Edier-WanTest”.
2:12
1 2
My Wi-Fi
EDIFIER ES300 XXXX
Other...
WLAN
Settings Edit
OTHER NETWORKS
SET UP NEW AIRPLAY SPEAKER...
2:12
Edier_Access
EDIFIER S300 xxxx
Other...
WLAN
Settings Edit
OTHER NETWORKS
SET UP NEW AIRPLAY SPEAKER...
2:12
My Wi
Show Other Networks...
Speaker Name EDIFIER S300 xxxx
AirPlay Setup
Cancel Next
This AirPlay speaker will be set up to join
“My Wi-Fi”.
NETWORK
SPEAKER PASSWORD
2:12
Password Optional
Verify Verify Password
My Wi-Fi
Show Other Networkss...
Speaker Name EDIFIER D32 XXXX
AirPlay Setup
Cancel Next
This AirPlay speaker will be set up to join
“Edier-WanTest”.
NETWORK
SPEAKER PSSWORD
2:12
Password Optional
Werify Verify Password
AirPlay Complete
Next
This AirPlay speaker joined “Edier-WanTest”.
2:12
Bekijk gratis de handleiding van Edifier S300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edifier |
| Model | S300 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 3748 MB |
