Handleiding
Je bekijkt pagina 1 van 7
2. What’s in the box?
Note:
•Images are for illustrative purpose only and may dier from the actual product.
•For the need of technical improvement and system upgrade, information and
specications contained herein may be slightly dierent from actual product. If
any dierence is found, the actual product prevails.
6. Bluetooth stereo pairing
4. Power on/o
7. Play control
8. USB connection
9. Light eects
10. Specications
11. Troubleshooting
Quick start guide Important safety instructions
USB-C to USB-C cable
Cleaning cloth
Speaker
Manual
Cannot connect to your Bluetooth device
•Make sure that the distance between this product and your Bluetooth device
is less than 10 meters and there are no obstacles between them.
•Make sure that no device is connected to this product via Bluetooth.
•Make sure that this product is in Bluetooth pairing mode. If not, manually
switch it to this mode.
•Resta this product, enable Bluetooth function on your Bluetooth device,
and then t again.
•Reset this product to facto settings and t again.
No sound
•Make sure that this product and your device is properly connected.
•Make sure that the correct audio input source is selected.
•Make sure that the playback is not paused.
•Increase the volume of this product and your device.
Noise coming from speakers
•EDIFIER speakers generate little noise, while the background noise of some
audio devices is too high. Please unplug audio cables and turn the volume
up. If no sound can be heard at 1 meter away from the speaker, there is no
problem with this product.
To learn more about EDIFIER, please visit www.edier.com
For EDIFIER warranty queries, please visit the relevant count page on
www.edier.com and review the section titled Warranty Terms.
USA and Canada: seice@edier.ca
South America: Please visit www.edier.com (English) or
www.edierla.com (Spanish/Pouguese) for local contact information.
With this app, you can
•control play from the Bluetooth
source device,
•control the master volume,
•select sound eects or customize EQs,
•upgrade the rmware, and
•more functions.
Download EDIFIER ConneX app
1. With your sma device, scan the QR code on the quick sta guide or the
packaging.
•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or
Google Play (Android devices).
2. Download and install the app.
How to use this app
1. Connect your sma device with the speaker via Bluetooth.
2. In Bluetooth mode, open EDIFIER ConneX App on your sma device.
3. Tap the menu for settings and playback control.
EDIFIER ConneX app
3. Charging
Note:
•Power input: 5 V 2 A
•"10" is the minimum power required by the radio equipment to charge.
"12" is the maximum power required by the radio equipment to achieve
maximum charging speed.
EN
1. EDIFIER ConneX mobile app
5. Bluetooth connection
Poable Bluetooth Speaker
QD25
10-12
W
Pair two QD25 speakers to enjoy stereo sound.
1. Double press the " " button on the rst QD25. The white LED will be in
breathing pattern.
2. Double press the " " button on the second QD25. The white LED will be in
breathing pattern.
•Once the connection is established, the blue LED on the rst QD25 will be
steady lit or blink fast, and the white LED on the second QD25 will light o.
3. Connect the rst QD25 to your Bluetooth device and sta playing.
•To exit the stereo mode, double press the " " button.
Note:
•The rst QD25 will work as the master speaker. You can control play on the
rst QD25.
•The rst QD25 will deliver right channel audio and the second one is for the
left channel audio.
•When two speakers are powered on again, they will connect automatically.
Bluetooth
Settings
EDIFIER QD25
DEVICES
Bluetooth
2:12
Declaration for EU
Frequency Band: 2.402 GHz ~ 2.480 GHz
RF Power Output: ≤13 dBm (EIRP)
There is no restriction of use.
Total output power (RMS): 15 W (Mid-bass) + 10 W (Treble)
Frequency response: 62 Hz~40 kHz
100%
20%
60%
5V 2A
OFFON
1.5s
1.5s
When the speaker is not under charging, it will automatically power o if there
are no audio playback and operation for 30 minutes. This function is enabled by
default. You can disable it in the menu of "Settings" > "Power saving mode" on
EDIFIER ConneX App.
Bluetooth
Settings
EDIFIER QD25
DEVICES
Bluetooth
2:12
x1
This speaker suppos the simultaneous connection of two Bluetooth devices.
Connect to a device
1. Press the " " button to switch to Bluetooth input mode. If no device is
connected, the speaker will auto-enter Bluetooth pairing mode (LED blinking
in blue). If not, press and hold the " " button for 1.5 seconds.
2. On your device, select "EDIFIER QD25" in its Bluetooth device list to connect,
and the blue LED will be steady lit when the connection is established.
•To disconnect from the current Bluetooth device, press and hold the " "
button for 1.5 seconds.
Connect to two devices
1. Connect to a device, and then press and hold the " " button for 1.5 seconds
(LED blinking in blue).
2. On the second device, select "EDIFIER QD25" in its Bluetooth device list to
connect, and the blue LED will be steady lit when the connection is established.
3. On the rst device, select "EDIFIER QD25" in its Bluetooth device list to reconnect.
•Pause or stop playback on the current Bluetooth device before streaming
audio from the second one.
Note:
•Pin code for connection is "0000" if needed.
•To enjoy all Bluetooth functions of this speaker, make sure that your audio
source device suppos A2DP and AVRCP proles.
•If no device is connected in 10 minutes, the speaker will switch to Bluetooth
hidden mode. The blue indicator will blink slowly. In this mode, (1) new devices
cannot nd the speaker, but (2) for a device that exists in the pairing record of
this speaker, you can select "EDIFIER QD25" from its Bluetooth device list to
reconnect. To exit from Bluetooth hidden mode, press the " " button on the
speaker.
•After switched to Bluetooth input, the speaker will reconnect to the last
connected devices automatically.
① ②
x2
① ②
x1
x1
x1
In USB audio streaming mode, volume sync is not suppoed. To adjust the
volume, adjust on the speaker and your device separately.
EDIFIER QD25
Note:
The following operating systems suppo USB audio streaming: Windows 11,
Windows 10, Windows 8, and Windows 7.
x1 ：
：
Note:
You can customize light eects and turn on/o the lighting on EDIFIER ConneX
App.
Bekijk gratis de handleiding van Edifier QD25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edifier |
| Model | QD25 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2747 MB |
