Bogen Nyquist NQ-GA20P2 handleiding
Handleiding
Je bekijkt pagina 31 van 45
27
To adjust the high/low pass parameters for a channel:
1 On the appliance Web UI’s main page, select DSP.
2 Select the Menu button for the channel.
3 From the drop-down menu, select High/Low Pass.
Note: If you want to return to the factory settings, select the Reset icon that appears in
the right corner.
4 Set the parameters described in the following table:
Figure 10. High/Low Pass Parameters
Table 11. High/Low Pass Parameters
High-Pass (Low Cut)
This feature helps eliminate low-frequency noise (signals of 100 Hz and below, such as
background rumble from ventilation systems, etc.) and is used primarily with micro-
phone-level input. It is particularly effective when handheld microphones are used.
Enable Enables or disables the High-Pass filter.
Bekijk gratis de handleiding van Bogen Nyquist NQ-GA20P2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bogen |
| Model | Nyquist NQ-GA20P2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5186 MB |
