Bogen Nyquist NQ-GA20P2 handleiding
Handleiding
Je bekijkt pagina 30 van 45
26
Setting High Pass/Low Pass Parameters
High-pass filters allow signals that are higher than the specified frequency and attenuate
signals that are lower. Low-pass filters allow signals that are lower than the specified fre-
quency and attenuate signals that are higher. When combined, they are known as a band-
pass filter. Band-pass filters can be used to tailor the frequency response of a microphone
exclusively for vocals, which can be very useful in a noisy environment to filter out the
higher and lower frequencies that could mask the human vocal range during announce-
ments.
You can specify the range of frequencies that will pass through the high-pass and low-
pass filters and select the type of filter that is used through the channel’s High/Low Pass
drop-down menu option.
Ratio Sets the compression ratio to be applied to the signal.
For example, if the ratio is set for 6 (6:1), the input signal
must increase by 6 dB for the output level to increase by
1 dB.
The range is 1 to 100.
Input meter Shows the strength of the input signal.
Output meter Shows the strength of the output signal, providing a
visual indicator of the effect of the compressor on the
output signal.
Comp LED Illuminates when compression is being applied to the
signal.
Table 10. Compressor Settings
Bekijk gratis de handleiding van Bogen Nyquist NQ-GA20P2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bogen |
| Model | Nyquist NQ-GA20P2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5186 MB |
