Axxess AXVI-1731 handleiding
Handleiding
Je bekijkt pagina 3 van 4
3
REV. 1/31/24 INSTAXVI-1731
RADIO FEEDBACK LEGEND & DIAGRAM
12-pin pre-wired AXSWC harness:
This harness is to be used along with the
optional AXSWC (not included) to retain
steering wheel audio controls. If the AXSWC
is not being used, disregard this harness. If
it will be used, please refer to the AXSWC
instructions for radio connections and
programming.
Note:
Disregard the harness that comes with
the AXSWC.
Connect the Red wire to the accessory wire.
2-pin connector ( E TO E1):
RESET AXSWC, and let it program to vehicle
and aftermarket radio.
With all connections made, if you do not get
correct controls for aftermarket radio, go
ahead and disconnect your 2-pin E to E1 and
connect E to E2 instead. (See diagram page 2)
Reset and allow the AXSWC to detect your
aftermarket radio and controls. Make sure
you get the following Green flashes and Red
flashes (1st and 4th Green longer followed
by the correct number of Red flashes for
aftermarket radio being used ( Refer to
Radio LED Feedback Legend at right.)
CONNECTIONS CONT.
L.E.D. Feedback: The (23) Red
L.E.D. flashes represent a different
radio manufacturer for the AXSWC
interface to detect. For example,
if you are installing a JVC radio,
the AXSWC interface will flash Red
(5) times, then stop. Following is
the L.E.D Feedback Legend, which
indicates the flash count of the radio
manufacturer
L.E.D FEEDBACK LEGEND
Flash Count
Radio
1
Eclipse (type 1) †
2 Kenwood ‡
3 Clarion (type 1) †
4 Sony / Dual
5 JVC
6 Pioneer / Jensen
7 Alpine *
8 Visteon
9 Valor
10 Clarion (type 2) †
11 Metra OE
12 Eclipse (type 2) †
13 LG
14 Parrot **
15 XITE
16 Philips
17 TBA
18 JBL
19 Insane
20 Magnadyne
21 Boss
22 Axxera
23 Axxerra (type 2)
KEYNOTES
* If the AXSWC interface flashes Red (7) times, and
an Alpine radio is not installed, that means there
is an open connection not accounted for. Verify
that the 3.5mm jack is connected to the correct
steering wheel jack/wire in the radio.
** The AXSWCH-PAR is required (sold separately).
Also, the software in the radio must be rev. 2.1.4
or higher.
† If a Clarion or Eclipse radio is installed and the
steering wheel controls do not function, change
the radio to Clarion (type 2) or Eclipse (type 2)
respectively. If the steering wheel controls still do
function, refer to the Changing Radio Type document
available at axxessinterfaces.com.
‡ If a Kenwood radio is installed and the L.E.D.
feedback flashes (5) times instead of (2), manually
change the radio type to Kenwood. To do this, refer
to the Changing Radio Type document available at
axxessinterfaces.com.
Bekijk gratis de handleiding van Axxess AXVI-1731, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXVI-1731 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 741 MB |
