Axxess AXVI-1731 handleiding
Handleiding
Je bekijkt pagina 4 van 4
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 1/31/24 INSTAXVI-1731
INSTALLATION INSTRUCTIONS
AXVI-1731
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM -5:00 PM
Sunday: 10:00 AM - 4:00 PM
With the key in the off position:
• Connect the AXVI-1731 harness into the interface, and then to the harness in the vehicle.
Attention!
If the interface loses power for any reason, the following steps will need to be performed again.
Also, if installing an
AXSWC connect it after you initialize and test the interface/radio, with the key in the off position.
•
Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.
Note:
If the radio does not come on within 60 seconds, turn the key to the off position, disconnect the interface, check all
connections, reconnect the interface, and then try again.
• Turn the key to the off position, and then to the accessory position. Test all functions of the installation for proper operation,
before reassembling the dash.
INITIALIZING THE AXVI-1731
INSTALLING THE AXVI-1731
Bekijk gratis de handleiding van Axxess AXVI-1731, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXVI-1731 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 741 MB |
