Axxess AXDSPX-BMWM25 handleiding
Handleiding
Je bekijkt pagina 4 van 8
4
1. Locate the factory amp in the left side of the trunk, unplug all connectors, then
remove the amp.
2. Install the AXDSPX-BMWM25 harness and make all necessary connections, but
leave the Blue/White amp turn-on wire disconnected.
3. Connect the MOST
®
fiber optic connector removed from the factory amplifier into
the AXDSPX-BMWM25 interface. For fiber optic connection, please refer to page 8,
Installing the Fiber Optic Cable.
4.
Plug the 12-pin and 16-pin connectors from the AXDSPX-BMWM25 harness into the
AXDSPX-BMWM25 interface.
5. Download and install the AX-DSP-XL app for your smart device.
6. Cycle the ignition on.
7. Open the app then select the Bluetooth Connection tab. Follow the instructions to
pair the mobile device to the interface. (Figure A)
I N STALL ATI O N
(Figure A)
Bekijk gratis de handleiding van Axxess AXDSPX-BMWM25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | AXDSPX-BMWM25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1505 MB |
