Axxess ANC-GMH1 handleiding
Handleiding
Je bekijkt pagina 5 van 14
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other
than the location mentioned below.
The ANC system operates when certain conditions are met:
• The amplifier passes self-diagnostic checks.
• All doors are closed.
• Battery voltage is between 9.5 V and 16 V.
• Cabin temperature is below 140°F (60°C).
• Engine speed is between 550 and 3000 RPM.
2019-2022 BLAZER
To bypass the ANC you would need to
remove the front right side of the center
console. Remove Junction Block Cover and
bolt. Pop off center console floor panel to
gain access to the Amplifier/ANC module
under center dash forward. Simply unplug
the OE connector form the AMP/ANC
module and plug the t-harness inline. Your
ANC’s have been bypassed.
ANC Location
RPO Codes: UQA, IOT, NKC
Bekijk gratis de handleiding van Axxess ANC-GMH1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | ANC-GMH1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8028 MB |
