Axxess ANC-GMH1 handleiding
Handleiding
Je bekijkt pagina 4 van 14
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other
than the location mentioned below.
The ANC system operates when certain conditions are met:
• The amplifier passes self-diagnostic checks.
• All doors are closed.
• Battery voltage is between 9.5 V and 16 V.
• Cabin temperature is below 140°F (60°C).
• Engine speed is between 550 and 3000 RPM.
2014-2018 SIERRA/SILVERADO 1500
2015-2018 SIERRA/SILVERADO 2500, 3500
To bypass the ANC mics the module could be
located in two possible locations. 1 – Under
the rear of center console or 2 – on the back
wall of the cab. Simply unplug the OE
connector form the AMP/ANC module and
plug the t-harness inline. Your ANC’s have
been bypassed.
ANC Location
RPO Codes: UQA, UQG, NKC
Bekijk gratis de handleiding van Axxess ANC-GMH1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | ANC-GMH1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8028 MB |
