Axxess ANC-GMH1 handleiding
Handleiding
Je bekijkt pagina 6 van 14
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other
than the location mentioned below.
The ANC system operates when certain conditions are met:
• The amplifier passes self-diagnostic checks.
• All doors are closed.
• Battery voltage is between 9.5 V and 16 V.
• Cabin temperature is below 140°F (60°C).
• Engine speed is between 550 and 3000 RPM.
2018-2024 EQUINOX, TERRAIN
To bypass the ANC you would need to
remove the driver side of the center console.
Pop off center console floor panel to gain
access to the Amplifier/ANC module under
center dash forward. Simply unplug the OE
connector form the AMP/ANC module and
plug the t-harness inline. Your ANC’s have
been bypassed.
ANC Location
RPO Codes: NKC+UZ6, UQA, IOT, IOU, IOS
Bekijk gratis de handleiding van Axxess ANC-GMH1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Axxess |
| Model | ANC-GMH1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8028 MB |
